龍門加工中心(包括橋樑和雙柱)AWEA LP-4025
美國總覽
參數轉換為英制
X軸行程 | 158 mm |
Y軸行程 | 98.6 mm |
Z軸行程 | 30.9 mm |
功率 | 26.1 kW |
主軸轉速 | 6,000 RPM |
刀庫容量 | 40 |
主軸錐度 | 50 |
工作臺寬(W) | 2,397.8 mm |
工作臺長(L) | 4,180.8 mm |
尺寸 | 34’6″ X 17’6″ x 130″ High |
重量 | 87,600 lbs. Approx. |
規格表
*All specifications are approximations and are subject to verification. Comes as shown in images. Please give us a call if you have any questions before purchasing. All sales are final.*
AWEA LP4025 CNC Equipped With:
Fanuc 18iMB CNC Control
158″ X 98″ Table
40 Station Side Mount Tool Changer
50 Taper Geared Head
6000 RPM Spindle
Coolant Thru Spindle
Powerful 35 HP high torque spindle motor
PCMCIA Card Slot
RS-252 Port
Spindle Orientation
Box Way Construction
Portable manual pulse generator
Flood coolant with large separate coolant tank Base
Flush Chip Disposal with Dual Auger
Chip Conveyor
Chiller Unit
Levelling Pads
Replacement Cost over $500,000.00
AWEA LP4025 CNC Specifications:
Travels:
X-Axis: 158.0″
Y-Axis: 98.6″
Z-Axis: 30.9″
Distance Between Columns: 106.2″
Spindle Nose to Table (Min.- Max.): 8.6″- 39.57″
Table: Length: 164.6″
Width: 94.4″
T-Slot: 0.87″ Wide X 20 X 7.87″
Max Weight on Table: 33,000 lbs
Spindle:
Taper Size: 50
Speed Range: 6000 RPM
Spindle Power: 35 HP
Feed rates: Rapid X,Y & Z: 590 inch per minute
Cutting Feedrate: .04″ – 376″ inch per minute
Automatic Arm Type Tool Changer:
50 Taper
Capacity: 40
Max Tool Weight: 43 lbs
Max Tool Length: 13.77″
Max Tool Dia.: 5.2 – 7.7″
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 3-Phase, 65 Kva
Floor Dimensions: 34’6″ X 17’6″ x 130″ High
with Hydraulic Unit, Chip Conveyor, Chiller unit
Weight: 87,600 lbs. Approx.
查看此類型更多的產品
VISION WIDE VB3016
龍門加工中心(包括橋樑和雙柱)
VISION WIDE VF4000
龍門加工中心(包括橋樑和雙柱)
QUICKMILL INTIMIDATOR 120
龍門加工中心(包括橋樑和雙柱)
OKUMA MCV 21-41
龍門加工中心(包括橋樑和雙柱)