Introducing the SHARP Precision Engine Lathe Model 1640L. This new equipment boasts a swing of 16" and a center distance of 40". With a powerful 7.5 hp motor and a spindle speed range of 40-2,000 RPM, it is perfect for your precision machining needs. Don't miss out on this professional-grade lathe.

Spesifikasyon

Özellikleri İmparatorluğa Dönüştür

Salınım	406.4 mm
Merkezler	1,016 mm
Mil Göbek Deliği	77.788 mm
Güç	5.6 kW
RPM (Dönüş Sayısı/Dakika)	2,000 RPM
Çapraz Sürgü Üzerinde Salınım	222.25 mm
Boyutlar	7.05'L x 2.66'W x 3.9'H
Ağırlık	3,600 lbs

İle donatılmış

 Bison 3-Jaw Chuck 10”  Coolant System  Halogen Work Light  Face Plate (16”)  Steady Rest (1/2” – 6”)  American Tool Post  Full Length Splash Guard  Follow Rest ( 0.59” – 2.76”)  Longitudinal Carriage Stops  Center sleeve ( MT 5 x 3)  Dead centers ( MT# 4x1, MT # 5 x1)  User can choose either 220V or 440 V . 575 V needs an optional transformer  Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 set of dead center, Pin for Indicator, Can of Paint OPTIONAL ACCESSORIES: •3 - Jaw 12” Chuck (QU) in lieu of the 3 - Jaw 10” (Standard Equipment) 3J12D8 add $ 330.00 NET 3-Jaw 12” Chuck (QU) 3J12D8 $ 1,290.00 •4 - Jaw 12” Chuck (QU) 4J12D8 $ 1,220.00 •3 - Jaw Chuck 10” (Bison) 803-1038 $ 1,980.00 •3 - Jaw Chuck 12” (Bison) 803-1238 $ 2,835.00 •4 - Jaw Chuck 12” (Bison) 853-1238 $ 2,180.00 • Chuck Guard( factory order only) 18C-01 $ 590.00 • Installation of chuck guard net $ 195.00 • Tool guard ( factory order only) TG 16 L $ 2,060.00 • Lead screw guard ( factory order only) LSG-1640 L $ 1,640.00 • Guard behind spindle( factory order only) GBS-16L $ 90.00 • UL/CSA switch board/UL motor/CSA pump in lieu of regular version UL/CSA-16 ( factory order only) $ 1,860.00 ** NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES, BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS. All heighted items are factory order only and all guards are needed for UL compliance certificate *** UL compliance certificate issued by CSA Group in Los Angeles with all highlighted parts above Net $ 4,750.00 • Micrometer Carriage Stop 18C-02 $ 225.00 • 4-Way Toolpost for 16” Swing Lathe 18C-05 $ 770.00 • Installation of 18C-05 $ 470.00 • Taper Attachment ( factory installed) 18C-03 $ 3,765.00 • Roller Jaws for Steady Rest 18C-04 $ 690.00 • (Extra) Steady Rest 16” for Lathes (1/2 – 6” Capacity) 16C-01 $ 865.00 • Steady Rest for 16” Lathes (4 – 9” Capacity) 16C-09 $ 1,720.00 • Drill & Arbor (JACOBS) 16/18-D/A $ 520.00 • Quick Change Tool (7 pcs) Holder Set (Aloris) CXA-2511-7250 $ 2,650.00 • Live Center – Royal (Dual Bearing) MT#4 10854 $ 495.00 • Live Center – MT#4 LC-MT4 $ 240.00 • 5C Collet Set (1/8” to 1-1/16” by 1/16”) 16 pcs.ACC-5C $ 495.00 • 5C Collet Closer for 16 / 18” Lathe (Atlas) CCD1-8 $ 2,435.00 • 575 V/440V/380V transformer, please select 440 T 10 net $ 1,755.00 • 10 HP motor in lieu of 7.5 HP with inverter ( factory order) $ ,595.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-1640 $ 2,590.00 • Fagor 40i D.R.O. FG-40i-1640 $ 3,780.00 • Acu-Rite 203S D.R.O. AR-1640 $ 2,750.00 • Newall DP700 D.R.O. NWDP-1640 $ 2,885.00 Factory Installation for all D.R.O. systems $ 680.00 NET Note: All prices and specification subject to change without notice.

spec Sheet

Specifications: Swing Over Bed: 16″ Swing Over Cross Slide: 8 3/4″ Swing Over Gap: 24 3/8″ Width of Gap: 9 3/4″ Center Height from Top of Compound: 1.9″ Distance Between Centers: 40″ Spindle Nose Type: D1-8 Camlock Spindle Bore: 3 1/16″ Spindle Speeds: 40 – 2,000 RPM (12 Steps) Taper of Spindle Bore: MT # 6 Taper of Center: MT # 4 Longitudinal Feeds: 0.002″ – 0.032″ /Rev. Cross Feeds: 0.0001″ – 0.0094″ /Rev. Inch Threads: 4 – 56 TPI Metric and Module Threads: 0.5 – 7 mm Leadscrew Pitch, Diameter: 4 TPI. 1 3/8″ Cross Slide Travel: 8.7″ Compound Rest Travel: 4.9″ Compound Width: 4 1/2″ Bed Length: 59″ Bed Width: 11 3/4″ Quill Travel: 5″ Quill Diameter: 2 1/4″ Quill Taper: MT # 4 Motor: 7.5 HP / 220v, 440v / 3ph Machine Weight 3,600 lbs STANDARD ACCESSORIES: 3-jaw chuck. (10”) Steady rest with bronze tip (1/2-6”) Follow rest Face plate (16”). Coolant system. American toolpost. Halogen work light. Longitudinal carriage stops. Tool kit. Full length Splashguard. OPTIONAL ACCESSORIES:  3 - Jaw 12” Chuck (QU) in lieu of the 3 - Jaw 10” (Standard Equipment) 3J12D8 add $ 330.00 NET 3-Jaw 12” Chuck (QU) 3J12D8 $ 1,290.00  4 - Jaw 12” Chuck (QU) 4J12D8 $ 1,220.00  3 - Jaw Chuck 10” (Bison) 803-1038 $ 1,800.00  3 - Jaw Chuck 12” (Bison) 803-1238 $ 2,575.00  4 - Jaw Chuck 12” (Bison) 853-1238 $ 1,980.00  Chuck Guard( factory order only) 18C-01 $ 590.00  Installation of chuck guard net $ 195.00  Tool guard ( factory order only) TG 16 L $ 1,870.00  Lead screw guard ( factory order only) LSG-1640 L $ 1,490.00 Guard behind spindle (factory order only) $75.00 UL/CSA switch board/UL motor/CSA pump in lieu of regular version UL/CSA-16 (factory order only) $1,550.00 Note: SHARP does not provide UL/CSA stickers on the machines, Buyers need to contract with a local agency to review the machine and then put "Compliance" stickers on the machine afterwards. Factory order.

Satıcı Hakkında

Görünüm Şirketin Bilgi

Bir teklif isteği

Listeyi isteyin eklendi

İstek gönderildi Wed/25/25