* SIEMENS-CNC-Control model M 810 for the Indexing axis ( X ) so there is no need for any change gears anymore, indexing steps from 0,001 – 2.100 mm adjustable, also different index - steps programmable on the same workpiece. * Manual adjustment of all hydraulic federates and quickfeeds, also 2-cut device available for roughing and finishing process, all slidetravels are limited by switches * 2-parts hydraulic workpiece clamping device in total 2.000 length x 160 mm width, * Heavy duty milling head with electronic drive for steplessly adjustable milling speeds. * Separate standing switch and cabinet, separate hydraulic unit, separate coolant device with swarfconveyor and swarfconveyor built-in the table * Central lubrication, etc. The CNC-Control can be easily retrofitted with a new SIEMENS 840 D if required.

Max. Cutting length 2.100 mm Milling travel / milling width cross max. 300 mm Module in steel / cast iron, max. 16 / 18 Table clamping size 510 x 2.400 resp. 275 x 2.120 mm Mounting height under cutter, depending on cutter Ø 150 – 430 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm Cutter width max. without/with counter bearing support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 ° Milling spindle speeds steplessly adjustable 40 – 120 rpm Milling slide swivelling right / left for Helix Cuts 30 ° Feeds, infinitely variable (milling slide) 0 – 1.300 / 2.000 mm/min Quick return of WP-table 10.000 mm/min Milling spindle drive 5,5 kW Total electrical load 10 kW - 400 V - 50 Hz Weight 5.000 kg