Distance Between Column 3,100 mm 122.04” Table Size of Working Surface 5,000 x 2,500 mm 196.85” x 98.42” Distance from Table to Spindle 0 – 1,800 mm 0 – 70.86” Table Load Capacity 25,000 kg 55,000 Lbs X Axis Travel 5,250 mm 206.69” Y Axis Travel 3,400 mm 133.85” Z Axis Travel 600 mm 23.62” W Axis Travel 1,400 mm 55.11” Z + W Axis (Ram + Crossrail Travel) 2,000 mm 78.74” Feed Speeds: X,Y Axis Rapid Feed Speed 20 m/min 787.40 ipm X,Y Axis Machining Feed Speed 1 – 10,000 mm/min 0.03 – 393.70 ipm X,Y Axis Micro Feed (Switchable by Pulse Generator) 0.001, 0.01, 0.1 mm/pulse. 001, 0.01, 0.1 mm/pulse Z Axis Rapid Feed Speed 8 m/min 314.96 ipm Z Axis Machining Feed Speed 1 – 8,000 mm/min 0.03 – 314.96 ipm Z Axis Micro Feed (Switchable by Pulse Generator) 0.001, 0.01, 0.1 mm/pulse 0.001, 0.01, 0.1 mm/pulse W Axis Rapid Feed Speed 6 m/min 236.22 ipm W Axis Machining Feed Speed 1 – 6,000 mm/min 0.03 – 236.2 ipm W Axis Micro Feed (Switchable by Pulse Generator) 0.001, 0.01 mm/pulse 0.001, 0.01, 0.1 mm/pulse Spindle: Spindle/Quill Diameter 90 / 300 mm 3.54/11.81” Spindle End ISO 50 ISO 50 Spindle Rotation Speed 40 – 6,000 rpm (S4 Digit) 40 – 6,000 rpm (S4 Digit) Motor Capacity: Spindle Deceleration Zone (Continuous Rating) VAC 22 Kw 29.5 HP (30 min Rating) VAC 26 Kw 34 HP High Speed (Continuous Rating) VAC 22 Kw 29.5 HP (30 min Rating) VAC 30 Kw 40 HP