FURN-TECK ENGINEERS CONTINUOUS GAS CARBURISING FURNACE
Fields of application (under protective gas) • Hardening • Carburizing • Carbonitriding Maximum temperature : 1750ºF (950ºC)
FURN-TECK ENGINEERS CRUCIBLE TYPE MELTING
These furnaces are suitable for HPDC / GDC shops where production rates are very low or metal quality is extremely crucial and only electric melting is requires. Being Batch type indirectly heatedf...
FURN-TECK ENGINEERS DIRECT BALEOUT
These furnaces are suitable for HPDC shops and to be attached directly to HPDC machines and much suitable for DIECASTING units which cater several alloys. 770KWH/ton at 720°C Tap out temperature
FURN-TECK ENGINEERS DIRECT BALEOUT TYPE MELTING AND HOLDING
These furnaces are suitable for HPDC / GDC shops where production rates are required upto 250Kg/Hr for single alloy. This furnace can also be used as central melting furnace for several GDC machine...
FURN-TECK ENGINEERS DIRECT BALEOUT WITH ONLINE DEGASSING
These furnaces are suitable for GDC shops where degassing index of molten aluminium plays vital role. The furnace is equipped with ONLINE DEGASSING machine which ensures supply of molten aluminium ...
FURN-TECK ENGINEERS ELECTRICAL CRUCIBLE
1.Energy consumption < 10 Kwh to 11 Kwh for 500Kg holding furnace. 2.Easily replaceable SiC heaters without removing the cricible 3.PID controlled heating system with THYRISTER drive 4.Temperature ...
FURN-TECK ENGINEERS HYDRAULIC TILTING MELTING FURNACE
1.Highly energy efficient . Consumes < 575Kwh / Ton 2.High metal yield >99.4% 3.Process visualisation on control panel. 4.Special shaft geometry ensures optimum utilisation of FLUE GASES. 5.Well En...
FURN-TECK ENGINEERS MELTING AND HOLDING FURNACE
Our Melting cum Holding furnaces are highly energy efficient and can be connected directly to the casting machine. The auto-ladle of pressure die casting machine can be used for baleout. For gravit...
FURN-TECK ENGINEERS REVERBRATORY SCRAP MELTING
SCRAP MELTING REVERBRATORY FURNACES are suitable for SCRAP RECYCLING / ALLOYING units where scrap will be charged in furnace and melted by using fuel fired burners. Prepared metal can be processed ...
FURN-TECK ENGINEERS ROTARY FURNACE
APPLICATIONS Copper Lead or Zinc Smelting Aluminium Dross or Scrap Recycling BENEFITS Conventional Process Efficient and Economical furnace configuration Rotary Furnace EQUIPMENT DESCRIPTION ...
FURN-TECK ENGINEERS TOP HEATED HOLDING
TOP HEATED HOLDING FURNACE Electrically Heated TOP HEATED HOLDING FURNACES are one of the most efficient HOLDING furnaces which consumes almost 50% less energy than conventional crucible type hold...
FURN-TECK ENGINEERS TOP HEATED HOLDING GAS FIRED
Gas fired TOP HEATED HOLDING FURNACES are equipped with TOP MOUNTED GAS BURNER system which is utilised to maintain desired holding temperature. The furnace can additionally equipped by FLAT FLAME ...
FURN-TECK ENGINEERS TOWER FURNACE
For Tower and Stack Furnaces Contact FURNTECK Engineers Today! You don’t need to search anymore. FURNTECK ENGINEER’S ECOMELT series furnaces can dramatically reduce your aluminum melting costs by i...
FURN-TECK ENGINEERS WITH HELICAL COILS FURNACE
These furnaces are suitable for HPDC / GDC shops where production rates are very low or metal quality is extremely crucial and only electric melting is required. Our high quality refractory, superi...