VT45PC
Worktable Worktable dimension mm 2-800×450
Max.load kg 600
T-slot 3-18×125
Travel X/Y/Z axis travel mm 650/450/450
Distance form table surface to spindle nose mm 150-600
Distance from spindle center to guideway guard of Z axis mm 580
Spindle Spindle speed  rpm 50-10000
Spindle torque N.m 72
Spindle motor kw 7.5/11
Spindle taper BT40
Feed rate X/Y/Z axis rapid feed rate m/min 48/48/36
X/Y/Z axis feed rate m/min 20
X/Y/Z axis feed axis motor kw 3
Tool magazine Taper shank type MAS BT40
Pull stud type MAS P40T-Ⅰ
Tool magazine capacity Tools 24
Max.tool diameter(adjacent pots full) mm Φ75
Max.tool diameter(empty) mm Φ130
Max.length of tool mm 300
Max.weight of tool kg 8
Tool change time(Tool-To-Tool) s 2.5
Controlling system FANUC 0i-MD
Accuracy X/Y/Z axis positioning accuracy mm 0.010/0.008/0.008
X/Y/Z axis repeatability mm 0.005/0.004/0.004
Overall dimension Floor space mm 3000×2988×2250
Weight T 8
Power supply Pneumatic pressure Mpa 0.5-0.8
Pneumatic air consumption L/min 500
Power supply(三相 AC380V,50/60Hz,) 3相 AC380V,50/60Hz,25KVA