톤수	45.359 t
Heating Element	Electric
# of Openings	1
Design	4 Post
Up or Downstroke?	Upstroke
Heated Platen (L-R)	381 mm
Heated Platen (F-B)	381 mm
Bed (L-R)	20 in
Bed (F-B)	20 in
스트로크	203.2 mm
Daylight	609.6 mm
IPM Closing	1,016 cm/min.
IPM Pressing	50.8 cm/min.
IPM Return	150"/minute
치수	60" L-R x 36" F-B x 80" H
무게	4500 lbs.

장착

Controls: Pushbutton operation with stroke, pressure & speed control Dual palm buttons Cycle timers – close, breath, dwell, cure (2) temperature controllers Mold heater receptacles Pressure gauge

스펙 시트

USED APPROX. 50 TON HULL HYDRAULIC MOLDING & LAMINATING PRESS 4 post upstroke type; cabinet style, floor standing Distance between 2.25" dia. posts: 20.5" L-R x 14" F-B Platen area (nominal): 20" L-R x 20" F-B Stroke of fully guided platen: 0-8" maximum Daylight opening (total): 24" maximum Daylight opening between hot plates (1): 10" maximum (with current setup) Hot plates (2): 15" L-R x 15" F-B x 2.5" thick (electrically heated) Bottom ejector rod spacings: 17.5" L-R or 19.5" L-R Main ram diameter (1): 8"/5.5" @ 2000 PSI - 50 tons Floor to top of moving platen: 46" Power unit (base of press): Hydraulic pump, driven by 7.5 HP 1755 RPM 230/460/3/60 motor Speeds approx.: 400"/minute closing 20"/minute pressing to 50 tons 150"/minute return Weight approx. 4500 lbs. Overall dimensions approx. 60" L-R x 36" F-B x 80" H Serial no. N/A Stock no. 29332 FOB ELK GROVE VILLAGE, IL