Tonnage	25.401 t
Tonnage of Transfer Ram	8 T
Stroke	152.4 mm
Daylight	533.4 mm
Bed (L-R)	476.25 mm
Bed (F-B)	457.2 mm
Heated Platen (F-B)	15 in
Heated Platen (L-R)	15 in
Up or Downstroke?	Downstroke
IPM Closing	762 cm/min.
IPM Pressing	88.9 cm/min.
IPM Return	240"/minute
치수	60" L-R x 36" F-B x 91" H
무게	4500 lbs.

장착

Controls: Pushbutton operation w/stroke, pressure & speed control Dual palm buttons Selector switch for manual or semi-automatic operation Cycle timers for close, breathe, dwell & cure (2) temperature controllers Mold heater receptacles Pressure gauges

스펙 시트

USED 28 TON HULL MODEL 359D HYDRAULIC TRANSFER MOLDING PRESS With 8 ton top transfer 4 post upstroke type; floor standing; cabinet style Distance between 1.75" dia. posts: 18.75" L-R x 9.25" F-B Platen area (nominal): 18.75" L-R x 18" F-B Stroke of fully guided platen: 0 - 6" maximum Stroke of hydraulic transfer ram: 0 - 8" maximum Daylight opening (total): 21" maximum Daylight opening between hot plates: (1): 10.5" maximum w/current setup Hot plates (2): 15" L-R x 15" F-B x 2.5" thick (electrically heated) Bottom ejector rod spacings: 17.5" L-R Main ram diameter (1): 6"/4" @ 2000 psi - 28 tons Transfer ram diameter (1): 3.25"/2" @ 2000 psi - 8 tons Floor to top of moving platen: 46" Power unit (base of press): Hydraulic pump, driven by 5 HP 1150 RPM 230/460/3/60 motor Speeds approx.: CLAMP TRANSFER 300"/minute closing 460"/minute closing 0-35"/minute pressing to 28 tons 0-125"/minute pressing to 8 tons 240"/minute return 725"/minute return Weight approx. 4500 lbs. Overall dimensions approx. 60" L-R x 36" F-B x 91" H Serial no. 2682 Stock no. 29333 FOB ELK GROVE VILLAGE, IL