Specifications
Max. swing over bed 26"
Max. length of workpiece 160"
Max. swing over cross slide 17 1/4"
Max. Swing in gap 35 3/8"
Width of Bed 16"
Effective length in gap to spindle 9"
Effective length in gap to chuck jaws 4 1/2"
Spindle bore 4 1/8" D1-8
Taper of spindle center M.T. #5
Spindle speeds 25-1,600 rpm / 16 steps
Longitudinal feeds 0.0016-0.055 IPR, 25 kinds
Cross feeds 0.0008-0.027 IPR, 25 kinds
Inch threads 80-7/16 TPI, 54 kinds
Metric threads 0.45-120 mm , 54 kinds
Diametral Pitch threads 7/8-160 DP , 42 kinds
Module threads 0.25-60mm, 46 kinds
Max. travel of top slide 9"
Max. travel of cross slide 14 1/2"
Spindle length w/o chuck 20 1/2"
Leadscrew length X TPI 1 1/2" x 2 TPI
Diameter of tailstock quill 3 1/2"
Max. travel of tailstock quill 9 1/4"
Taper of tailstock quill center MT5
Main motor 15HP, 220V/40A or 440V/20A, 3 phase
Rapid traverse motor 1HP, 220V or 440V, 3 phase
Coolant pump 1/8 HP, 220V, or 440V, 3 phase
Net weight 10,850 lbs.
Overall dimensions, LxWxH 227" x 46" x 72"

Standard Equipment
Taper turning attachment
SINO DRO + Glass Scales
Chuck guard with safety shut off
Carriage Stop
12” 3-jaw chuck with top reversible jaws, direct mount
16” 4-jaw chuck, direct mount
18” Face plate
7-1/2” large steady rest with roller jaws
3” follow rest
Removeable gap
4-way tools post
Foot brake
Halogen Work light and coolant system
Full length splash guard
Dead centers
Thread chasing dial
Tool box and leveling pads