Material Support Slats: 4” x 1/8” Galvanized Steel Maximum Supported Material Load: 400 lbs/sq ft (1,950 kg/sq meter) Electrical Requirements: 3-Phase, 380-480 VAC ±10%, 50-60 Hz Noise Level: Below 80 dBA at one meter for submerged cutting X-Y Speed: 350 in/min (8,890 mm/min) Z Speed: 100 in/min (2,540 mm/min) Linear Positional Accuracy: * ±0.001” (±0.025 mm) Repeatability: * ±0.001” (±0.025 mm) Ballbar Circularity: * ±0.0025 (0.0635mm) WORK ENVELOPE: X-Y Cutting Travel: * 14’ 0” x 6’ 8” (4,267 mm x 2,032 mm) Z-Axis Trave: l* 12” (305 mm) Pump Power: 100 HP w/ 60,000 PSI Material Supports Slats Size: 4” X ⅛” Galvanized Steel Abrasive Hopper: 6CUFT Head: A-Jet Equipped With: Omax Water Recycling System w/ Water Chiller Spare A-Jet Head