CNC旋盤HAAS SL-20T
Minnesota, アメリカ合衆国概要
Haas SL-20T CNC Turning Center with Tailstock, Haas ServoBar Feed, Chip Con, Parts Catcher, Tool Presetter
Stock: 7139
Manufacturer: Haas
Model: SL-20
Age: 2006
CONTROL: HAAS CNC WITH COLDFIRE PROCESSOR
MAX TURNING DIAMETER: 10.3"
MAX TURNING LENGTH: 20"
SPINDLE SPEEDS: 4,000 MAX RPM
SPINDLE DRIVE: 20 HP VECTOR
SPINDLE NOSE: A2-6
HOLE THRU SPINDLE: 3.0"
HOLE THRU DRAW TUBE: 2.06"
TURRET CAPACITY: 10 STATION
TURRET TRAVELS (X,Z): 8.45" / 20"
MAX SWING OVER BED: 23"
MAX SWNG OVER SADDLE: 9.5"
RAPID TRAVERSE RATE (X/Z): 710 IPM
TAILSTOCK?: YES
TURRET INDEX TIME: 1 SECOND PER STATION
TAILSTOCK TRAVEL: 20"
TAILSTOCK QUILL DIAMETER / TAPER: #4 MORSE TAPER
Equipped With:
Haas CNC Control with Coldfire Processor, Parts Catcher, Tool Presetter, Programmable Tailstock, Haas ServoBar 300 Magazine Bar Feed (Serial: 92041), Hennig Chip Conveyor, 10 Station Bolt-ON Tool Turret (5) Bolt-On Boring Holders, (3) Turning Holder Clamps, 5C Collet Closer, 8" 3-Jaw Chuck, Foot Pedal for Hydraulic Actuator and Tailstock, Mist Buster Mist Collector, Assorted Spindle Liners, USB Port
スペックをインペリアルに変換する
チャック サイズ | 203.2 mm |
棒 能力 | 50.8 mm |
#Axis | 2 |
パワー | 14.9 kW |
最大回転数 | 4,000 RPM |
ターニング 径 | 261.62 mm |
スイング | 584.2 mm |
加工長 | 508 mm |
心押し台 | Yes |
ライブツーリング | No |
サブスピンドル | No |
コントロール | NC (HAAS CNC WITH COLDFIRE) |
装備
Equipped With:
Haas CNC Control with Coldfire Processor, Parts Catcher, Tool Presetter, Programmable Tailstock, Haas ServoBar 300 Magazine Bar Feed (Serial: 92041), Hennig Chip Conveyor, 10 Station Bolt-ON Tool Turret (5) Bolt-On Boring Holders, (3) Turning Holder Clamps, 5C Collet Closer, 8" 3-Jaw Chuck, Foot Pedal for Hydraulic Actuator and Tailstock, Mist Buster Mist Collector, Assorted Spindle Liners, USB Port
スペックシート
Haas SL-20T CNC Turning Center with Tailstock, Haas ServoBar Feed, Chip Con, Parts Catcher, Tool Presetter
Stock: 7139
Manufacturer: Haas
Model: SL-20
Age: 2006
CONTROL: HAAS CNC WITH COLDFIRE PROCESSOR
MAX TURNING DIAMETER: 10.3"
MAX TURNING LENGTH: 20"
SPINDLE SPEEDS: 4,000 MAX RPM
SPINDLE DRIVE: 20 HP VECTOR
SPINDLE NOSE: A2-6
HOLE THRU SPINDLE: 3.0"
HOLE THRU DRAW TUBE: 2.06"
TURRET CAPACITY: 10 STATION
TURRET TRAVELS (X,Z): 8.45" / 20"
MAX SWING OVER BED: 23"
MAX SWNG OVER SADDLE: 9.5"
RAPID TRAVERSE RATE (X/Z): 710 IPM
TAILSTOCK?: YES
TURRET INDEX TIME: 1 SECOND PER STATION
TAILSTOCK TRAVEL: 20"
TAILSTOCK QUILL DIAMETER / TAPER: #4 MORSE TAPER
このモデルのより多くのリストを参照してください。
このタイプのリストを参照してください
MITSUBISHI M-TC10B
CNC旋盤