SHARP 2660B 4.5" SPINDLE BORE Precision Engine Lathe FEATURES: • D1-11 Camlock • 4.5” Spindle Bore • Direct Selection For Inch/Metric Threads • One Piece Cast Meehanite Bed • Quick Change Gearbox • 15 HP Motor • 12-Speed Gear Head (10-1,000 RPM)

スペック

スペックをインペリアルに変換する

スイング	660.4 mm
センター	1,524 mm
スピンドルボア	114.3 mm
パワー	11.2 kW
回転数	1,000 RPM
寸法	114" x 41" x 52"
重さ	5,786 lbs

装備

STANDARD EQUIPMENT: • 4-Jaw 16” Chuck. • Coolant System • 4 Way Tool Post • Halogen Work Light • Face Plate 20” • Steady Rest (4”-11.5”) • 4-Way Carriage Stop • Splash Guard • 16” Chuck Guard • Tailstock • Follow Rest ( 1.57” – 6.3”) • Wired 220V or 440V. Please Specify • Tool Kit: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint OPTIONAL ACCESSORIES: • 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $ 2,475.00 • 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $ 4,490.00 • 4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $ 2,700.00 • 3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $ 2,650.00 • 4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $ 1,885.00 • Taper Attachment (Factory order) 991126 -22 $ 3,405.00 • Installation of taper attachment net $ 835.00 • Drill & Arbor (JACOBS) 22/30B-D/A $ 830.00 • Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $ 2,480.00 • Live Center – MT#5 LC-MT5 $ 220.00 • 5C Lever Collet Closer ( Altas) CCD1-11 $ 2,395.00 • 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $ 370.00 • Micrometer Carriage Stop 20C-02 $ 315.00 • Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $ 2,020.00 • Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $ 2,410.00 • Roller Jaws Set (3 pcs) 26C-RJAW $ 1,180.00 • Chuck Guard with limited switch ( factory order only) 22B-04 $ 510.00 • Tool guard with limited switch ( factory order only) G 2240 $ 2,110.00 • Lead screw guard ( factory order only) LSG -2240 $ 1,265.00 • Guard behind spindle( factory order only) GBS -2240 $ 55.00 • UL/CSA switch board/UL motor/CSA pump in lieu of regular version ( factory order) UL/CSA 2260 $ 1,980.00 NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES, BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS. *** UL compliance certificate issued by CSA Group net $ 4,860.00 DIGITAL READ OUT SYSTEMS: • Fagor 20i D.R.O. FG-2680 $ 3,515.00 • Fagor 40i D.R.O. FG-40i-2680 $ 4,540.00 • Acu-Rite 203S D.R.O. AR-2680 $ 4,670.00 • Newall DP700 D.R.O. NWDP-2680 $ 4,380.00

スペックシート

SPECIFICATIONS:  Capacity • Swing Over Bed 26” Swing Over Cross Slide 17.24 Center Height 13" • Swing Over Gap 35” • Distance Between Centers 60" Headstock Spindle Nose Type D1-11 camlock • Spindle Bore 4.5” • Spindle Speeds (12) 10-1,000 rpm • Taper of Spindle Bore MT#7 • Taper of Center MT#5  Threads and Feeds • Longitudinal Feeds – in/rev (18) 0.0022 - 0.032” • Cross Feeds – in / rev {#} 0.0026 –0.035” {17} • Inch Threads (#) 2-56 tpi {44} • Metric and Module Threads {#} 0.5-14mm {24} • D.P. Threads (36) 4-56 mm • Leadscrew Pitch, Diameter 4 tpi, 1-1/2”  Carriage • Cross Slide Travel 14.75” • Compound Rest Travel 8” • Compound Width 6”  Bed • Bed Width 15-3/4”  Tailstock • Quill Travel (graduated) 6-1/2” • Quill Diameter 3” • Quill Taper MT#5  General • Spindle Motor (220V or 440V, 60, 3) 15 HP • Net Weight (approx.) 5,786 LBS • Dimensions ( L x W x H) 114” x 41” x 52” • Standard Color Gray  Specifications may be changed or improved without notice.  Total Power Consumptions • 230V 16KVA/45 amps • 460V 16VA/22.5 amps