The No. 116 Hypoid Generator is a completely automatic, highspeed machine for cutting spiral bevel, Zero bevel and hypoid gears. The machine is outstanding for its range of work-capable of roughing and finishing both gears and pinions. It handles diameters up to 18 inches, and gears of 2 diametral pitch and finer. This new generator offers many advantages: improved quality of product, increased production rates, longer cutter life, easier setup and operation, simplified development of tooth bearing and the use of the Unitool method.

スペック

スペックをインペリアルに変換する

最大径ギアー	457.2 mm
Maximum Face Width	69.85 mm
Diametral Pitch	2
Maximum Cone Distance	228.6 mm
Extreme Ratio	10:1
Control Manufacturer	Conventional
重量	23,400#

装備

Modified Roll Hydraulic Chucking Chip Conveyor Coolant System Change Gears

スペックシート

Specifications: Maximum Pitch Diameter: 18" Maximum Rate: 10/1 Maximum Cone Distance: 9" Work Head Angle: 5 degrees - 84 degrees Diametral Pitch, Coarsest: 2 Face Width, Maximum: 2-3/4" Number of Teeth: 5-175 Spindle: Diameter Of Taper Hole, Large End: 3-29/32" Taper Per Foot: 39/64" Depth Of Taper: 6" Diameter Of Hole Thru: 3-1/16" Spindle Nose To Centerline: 5-1/2" Speeds and Feeds: Cutter Speeds, Feet Per Minute: 20-115 RPM Feeds, Seconds Per Tooth: 9-80 Seconds Electrical Equipment: Feed Motor: 5 HP, 1800 RPM Hydraulic Pump Motor: 3/4 HP, 1800 RPM Coolant Motor: 1/2 HP, 3600 RPM Floor Space: 75" x 114" Net Weight: 23,400 lbs Shipping Weight, Boxed for Export: 1 Case - 10'6" x 8'9" x 6'5": 26,100 lbs