The most complete laser station for permanent marking. From unit to small batch production to integration in a robotic cell. Compatible with Fibre, Hybrid or Green source.

TOUCH SCREEN
Just press the touch screen and the LW2 station takes care of the rest! The door closes automatically, the laser is positioned at the right focus height, the marking is done in a few seconds and the door opens. This laser station does not require training. All you have to do is prepare your marking sheets and load them into the station via the USB port.
COMPLETE SAFETY
The safety of the operator is our priority. The laser marking station is certified as class 1 laser products, meeting all safety requirements, allowing use in unrestricted environments: integrated fail-safe relay, protective glass, door closure security, emergency stop, door fitted with sensors and anti-pinch system,
integrated extraction and filtration solution to protect users from dust and smoke. Mechanic and electronics are fully protected in a sealed box. Integrated alarms and controls.
FLEXIBILITY
Large marking area with 3 sides door, marking of a large variety of parts, from small to big parts, from simple to complex shapes. LW2 TOUCH is compatible with all laser sources to offer you the possibility to mark on any type of material. We propose 2 software choices for the creation and control of your marking station to adapt to your needs and various and varied applications: Lasertrace & Gravostyle.

Unit Marking
The LW2 offers a number of setting aids on the touch screen for
individual use: Easily find the focal length thanks to the focusing diodes. Simply join the two laser diodes by adjusting the laser height with the motorized axis. The laser automatically positions itself to the focal length at the start. You only have to enter the part height directly on the screen. Thanks to the simulation mode, the station shows you the exact positioning of your future marking directly on the part.

Batch Marking
LW2 is fully programmable to become an automated station: All the marking files are pre-recorded by the supervisor on the station. The entire marking process is programmable: marking informations, part height, time stamping, serialization, door opening/closing, I/O
activation, etc... The LW2 can then switch to operator mode. No risk of errors, training free, just press a single button to start the
next marking The production mode allows you to go further in managing the traceability of your batches by connecting to your internal databases. You thus connect the content of the marking to your databases and the history of the marked parts for an easier production process.

High Paced Marking In The Production Cell
The marking station is controlled remotely, thanks to dedicated and
programmable I/Os. It can be integrated into a robotic cell and associated with robots or cobots. The speed of door opening/closing has been optimized (2s) as well as the durability of our components to allow high volume production in a difficult environment. This allows you feel secure about integrating our laser station on your production line. Gravotech offers you a ready-to-integrate package.