Max machining diameter 280mm (11.02”) Max bar capacity 65mm (2.56”) Main spindle speed 4,500min Back spindle speed 4,500min Live tool speed 5,000min Total number of turret positions 12 Rapid traverse rate X/Z X: 24 m/min Z: 27 m/min Rapid traverse rate A/Y A: 27 m/min Y: 12 m/min Main Spindle Motor 10/15 HP Back Spindle Motor 7.4/10 HP Live Tool Motor 1.2/5 HP Width × Depth × Height 106”×74”×75” Weight 13,228 lbs 12 Position Turret with All Positions Driven 300 PSI High Pressure Coolant Thru Turret and Ejector Y Axis Turret Positioning by Compound Slide with 3.94” Total Stroke All Stations Live Tool Capable with 5Hp live tool motor Integrated Motor Main Spindle with C-axis and Brake 2 Speed Electronic Winding on Main Spindle for high torque at lower speeds Integrated Motor Sub Spindle with C-axis and Brake Spindle Chiller circulating temperature controlled oil to Main and Sub spindle Rigid Tapping on Main, Sub, and Live tool Spindle and Turret Air Purge Tool Touch Setter, Manual Swing Down 8” 3 Jaw Hollow Chuck on Main Spindle 2.56” Bar Capacity Through Main Spindle 6” 3 Jaw Hollow Chuck on Sub Spindle 2.04” Though Sub Spindle Bore Foot Switches for Main and Sub Chucks Pneumatic Ejector, 5.5” stroke (3295-Y1471)