Manufacture: - Pro Eco - new 1984 - New controls in 2007 - Line shut down in 2009 - No parts have been cannibalized - complete line! Materials: - Aluminum Alloys Strip Width: - Width before slit = Min: 29" / Max: 64.75" - Width after slit = Min: 28" / Max: 62.5" Strip Thickness: - Min: 0.006" / Max: 0.063" Line Speed: - 0 - 2,000 fpm constant Entry Coil Size: - ID = 16, 20, 24" (16" = +1.25" / - 2.00")(20 & 24" = + 0.5" / - 5.5") - OD = Min: 36" / Max: 103" - Weight = Min: 2,448 lbs / Max: 50,000 lbs Exit Coil Size: - ID = 16" & 24" (16" = + 0.0 / - 0.75") (24" = +/- 0.5") - OD = Min: 36" / Max: 103" - Weight = Min: 2,448 lbs / Max: 50,000 lbs Width Tolerances: (1/2 of commercial tolerance (+/-) (STD Capability): - Over 24” thru 48” 0.02344” - Over 48” thru 60“ 0.03125” - Over 60” = 0.06250” Slitting Capacity: - 7.5" diameter arbor - Single slit width = Min: 28" / Max: 62.5" - Single slit gauge range = Min: 0.006" / Max: 0.063" - 10" max cuts / 6" min cut strand width Side Trim Width Capability: - Min: .50" / Max: 2.25" - 8" diam arbor - 8" diam cutter on scrap choppers Tension Leveler and Capabilities: - Pure "Flex-roll" tension leveling - Flex-roll section: 2 cassettes over 3 cassettes, 2" diam work rolls - Entry & Exit 4-Roll Bridle Sections: 4-rolls each bridle, all 8 rolls driven individually, 25" diameter bridle rolls - Crossbow correction exit roll (eliminates bowing across the width of the strip) - 1% elongation on 58,000 lb. yield at maximum width of 62.5” and minimum gauge of 0.006” Sold "as is, where is" EXW installed at seller's factory foundation USA. - Complete line, no parts have been cannibalized. - Gearboxes, etc. have been visually inspected and are in excellent condition.