SPECIFICATIONS LABEL UNIT X-Axis Travel: 16.0 inches Y-Axis Travel: 12.0 inches Z-Axis Travel: 10.0 inches Spindle Nose to Table (~MAX): 14.0 in Spindle Nose to Table (~MIN): 4.0 in Spindle Max Rating: 15.0 HP Spindle Max. Speed: 10,000 RPM Spindle Max Torque: 17.0 ft-lbf @ 4,600 RPM Spindle Drive System: Direct Speed, Belt Drive Spindle Taper: CT or BT 40 Spindle Bearing Lubrication: Air / Oil Injection Spindle Cooling: Air Cooled Table Size: Length: 36.0 in, Length (Work Area): 28.75 in. x Width: 12.0 in. T-Slot Width: 0.626 in. to 0.630 in T-Slot Center Distance: 4.33 in Number of Std T-Slots: 3 Max Weight on Table (Evenly Distributed): 500 pounds Max Cutting: 833 IPM Feedrates: Rapids on X-Axis: 1,200 IPM Feedrates: Rapids on Y-Axis: 1,200 IPM Feedrates: Rapids on Z-Axis: 1,200 IPM Axis Motor Max Thrust X: 2,000 IBF Axis Motor Max Thrust Y: 10 Tool Changer Type: Carousel Tool Changer Capacity: 10 Max Tool Diameter (Full): 3.5 in Max Tool Weight: 12 lbs. Tool-to-Tool (AVG): 4.2 s Chip-to-Chip (AVG): 5.0 s Coolant Capacity: 40 gal Air Requirements: 4 scfm @ 100 PSI Inline Air Hose: 3/8 in Coupler (Air): 3/8 in Air Pressure Min: 80 PSI Spindle Speed: 10,000 RPM Drive System: Direct Speed, Belt Drive Spindle Power: 15.0 HP Input AC Voltage (3 Phase) - Low: 220 VAC Full Load Amps (3 Phase) - Low: 40 A Input AC Voltage (3 Phase) - High*: 440 VAC Full Load Amps (3 Phase) - High*: 20 A Dimensions (Shipping Pallet): 90 in. x 64 in. x 100 in. Weight: 4000 pounds