The No. 14 Straight Bevel Coniflex® Generator is an automatic machine for cutting straight bevel Coniflex gears. A wide range of work is covered - gears up to 24" in diameter at 10 to 1 ratio, 3½" face width and 3 diametral pitch. This generator is a two tool machine employing side-cutting tools, which operate alternately on opposite sides of the gear tooth being cut. The No. 14 Straight Bevel Coniflex Generator offers many advantages: improved quality of product, increased production, ease of setup and operation, and simplified calculations and development.

Spécifications

Convertir des spécifications en impériale

Pignon dia maxi	609.6 mm
Maximum Face Width	88.9 mm
Diametral Pitch	3
Maximum Cone Distance	304.8 mm
Extreme Ratio	101
Number of Teeth	0
Control Manufacturer	Conventional
Dimensions	76" x 56"
Poids	14,800#

Équipé avec

Coniflex Gauges Change Gear Cabinet Hydraulic Work Clamping Stock Divider Cutter Block Rough/Finish Feed Cam Draw Bar Chip Basket Hydraulic System Coolant Pump

Fiche technique

Specifications: Gear Diameter: up to 24" Cone Distance (Maximum): 12" Cone Distance (Minimum): 0 Extreme Ratio: 10:1 Diametral Pitch (coarsest): 3 DP Index Range: 5 to 100 inclusive and most numbers up to 200 Diameter of Taper Hole at Large End: 3 29/32" Taper per Foot: 39/64" Depth of Taper: 6" Diameter of Hole Through: 3 1/16" Spindle Nose to Machine Center: 2 1/2" x 15" Cutter Speeds (Strokes per Minute): 64 to 495 Feeds (Seconds per Tooth): 10 to 131 Main Motor: 3 H.P., 1800 RPM Floor Space: 76"x56" Net Weight: 14,800 lbs.

À propos du vendeur

Info View Company

Demander un devis

Ajouté à la liste Demande

Demande présentée 12/24/24