(2) Available

Mitsubishi MV-2400S Electrical Discharge Machine (2018) Machine Travels: X x Y x Z in (mm) 23.6 x 15.7 x 12.2 (600 x 400 x 310) Maximum Workpiece Dimensions: W x D x H in (mm) 41.3 x 32.3 x 12.0 (1050 x 820 x 305) Max. Submerged Workpiece Weight: lb (kg) 3307 (1500) Table Dimensions: in (mm) 33.0 x 22.0 (840 x 560) U/V Travels (from center): in (mm) ±3.0 x ±3.0 (±75 x ±75) Taper Angle @ Thickness: in (mm) 15 deg.@ 10.2 (15 deg.@ 260) Wide Angle Taper (Optional Guides Required) 45 deg. @ 2.4″ 60mm (No AT Possible) Table Rapid Feed Speed: in/min (mm/min) 51.2 (1300) Power Supply V350-V Minimum Drive Unit / Resolution 0.000002 / 2 µin ( 0.00005 / 50nm) User Program Storage [Hard Disk Size] 1 GB [32 GB CFAST Card Size] Wire Diameter Possible: in (mm) 0.004~0.012 (0.1~0.3) Minimum Start Hole Diameter: in (mm) 0.02 (0.5) Max. Wire Spool size On Machine / Cabinet STD: lb (kg) 22 / 44 (10 / 20) Filters / Type 2 / Paper Filter Tank Capacity: gal (L) 227 (860) Machine System Dimensions: in (mm) 105.8 x 119.3 (2687 x 3030) Machine Installed Height: in (mm) 84.6 (2150) Machine System Weight: lb (kg) 7716 (3500) Fluid System Weight: lb (kg) 711 (350) Power Requirements [KVA] 200-230V [13.5] Built in AVR Compressed Air Requirements 2.7 cu.ft./min. @ 71~100 psi