Schweizer CNC DrehautomatenHANWHA XD32H
Vereinigte Staaten von AmerikaÜberblick
Marke
Modell
ID#
577623
Zustand
Gebraucht - Gut
Jahr
2008
Standort
Vereinigte Staaten von Amerika
Lager #
032787
Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 – Low Hours, MTA Bar Feeder
Konvertieren Specs auf Englisch
Spindelbohrung | 32 mm |
UPM | 8,000 RPM |
Strom | 7.5 kW |
Achse | 5 |
Datenblatt
Machining Capacity:
Maximum Bar Capacity Round: 1.250”
Maximum Bar Capacity Hex: 1.062”
Maximum Bar Capacity Sub-Spindle: 1.250”
Tapping Capacity Main Spindle: 0.312”
Front Ejection from the Sub-Spindle: 3.000”
Rear Ejection from the Sub-Spindle: 11.000”
Drilling Capacity on the Sub-Spindle: 0.393”
Tapping Capacity on the Sub-Spindle: 0.312”
Drilling Capacity on the Cross Drill: 0.275” / 0.393”
Tapping Capacity on the Cross Tap: 0.250”
Main Spindle:
Spindle Speed: 300 to 8,000 RPM
AC Spindle Drive Core Motor (Chilled): 7.5 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z1-Axis Horsepower: 2.0 HP
Z1-Axis Stroke: 12.500”
Z1-Axis Rapid Traverse: 1,200 IPM
Sub-Spindle:
Spindle Speed: 300 to 7,000 RPM
AC Spindle Drive Core Motor: 3 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z2-Axis Stroke: 12.500”
Z2-Axis Rapid Traverse: 1,200 IPM
Z2-Axis Horsepower: 2.0 HP
Cross Working Spindles:
Spindle Speed: 200 to 6,000 RPM
AC Spindle Drive Geared: 1.7 HP
Tool Position:
O.D. Tool Positions:5
O.D. Tool Shank: 0.625” Sq
Cross Mill / Drill Stations: 4
Main Spindle I.D. Tool Positions Total (ER-16 Type): 7
-5 Stationary from the Main Tool Stand
-2 Powered Face Mill / Drill stations independent from the Main Tools
Sub-Spindle I.D. Tool Positions Total (ER-16 Type): 9
-5 Stationary from the Main Tool Stand
-2 Stationary Independent from the Main Tools
-2 Gear Driven Independent from the Main Tools to 6,000 RPM
Coolant / Lubrication Systems:
Coolant Pump Motor: 0.6 HP
Coolant Tank Capacity: 45 Gallons
Way Lube Tank Capacity: 0.48 Gallons
Machine Dimensions: 65″W x 94″L x 69″H
Weight 9,500 LBS
General Specifications:
Voltage: 3 Phase 200V-220V
Power Required: 30 KVA
Compressed Air: 80 PSI
Equipped With:
– MTA Eagle Bar Feeder
– Fanuc 18iTB System 2 Path
– Full C-Axis, Both Main and Sub Spindles
– Rigid Tapping
– Cross Drilling Unit
– Part Conveyor
– Part Separator
– Air Blow Unit
– Assorted Collets and Tooling
Sehen Sie mehr Angebote dieses Modell
HANWHA XD32H
Schweizer CNC Drehautomaten
HANWHA XD32H
Schweizer CNC Drehautomaten
HANWHA XD32H
Schweizer CNC Drehautomaten
HANWHA XD32H
Schweizer CNC Drehautomaten
Weitere Immobilien des dieser Art
CITIZEN M32VIII
Schweizer CNC Drehautomaten
STAR ST-38
Schweizer CNC Drehautomaten
STAR SR-20RIV/B
Schweizer CNC Drehautomaten
STAR SW-20
Schweizer CNC Drehautomaten
Weitere Immobilien für diese Marke
HANWHA SL32HPII
Schweizer CNC Drehautomaten
HANWHA STL32H
Schweizer CNC Drehautomaten
HANWHA XP12
Schweizer CNC Drehautomaten