AMADA HK-400

  • المواصفات
    تحويل المواصفات إلى الامبراطوري
    السعة المستطيلة (ارتفاع
    280 mm
    السعة المستطيلة (عرض
    400 mm
    سعة الدوران
    320 mm
  • نظرة عامة على المنتج

    The Vision of Precision

    • 3 H.P.
    • 1 1/4” Blade
    • Semi-Automatic
    • Metal Cutting

    FEATURES
    • Saw Head Frame
    - The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor and saw guide arm mounting supports.
    • Band Wheels & Drive System
    - The inverter-controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high-efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set using the band speed adjustment knob on the control panel.
    • Canted Head and Single Column Mounting
    - The head is canted 8° to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single-column mounting enables the saw guides to be much closer together compared to scissor-type machines which improve the cutting performance.
    • Full Stroke Clamping Vise
    - The full stroke clamping vise reduces the operator’s setup time for different widths of material.
    • Manual Vise Inching Control
    - The vise inching control enables the operator to more accurately locate the workpiece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.
    • Guarding
    - The saw band is constrained within the heavy gage guarding in all non-cutting areas.

  • نبذة عن الشركة
    Amada Company, Ltd

    the grinding machines, lathes, and press handled by amada wasino are all manufactured at specialty factories. grinding machines are manufactured at the komaki grinder factory with an area of 8,500 square meters, lathes at the 21,000 square meter imamura plant, and presses at the komaki press factory which has an area of 7,100 square meters. each type of machinery is produced on integrated assembly lines. at each factory, everything from components production to final assembly is subjected to thorough production control. besides this, stringent quality control standards are enforced through precision detection and measurement devices.


تبحث لشراء جديد AMADA HK-400 ؟

الموزعون و مكاتب المبيعات و مراكز الخدمة والإصلاح