الأرجحة	736.6 mm
أرجحة فوق المجارى المتقاطعة	520.7 mm
المراكز	2,032 mm
ثقب عامود الدوران	101.6 mm
RPM	1,200 RPM
القدرة	11.2 kW
الأبعاد	R-L 140" X F-B 72" X Height 72"
الوزن	9,250 Lbs.

مجهزة

FEATURES: High precision hardened and ground spindle Hardened and precision ground induction bedways with high tension mechanize casting iron The spindle is supported by 3 bearings (2 taper roller bearings and one ball bearing) 4-1/8" large spindle bore with D1-11 camlock spindle nose Rapid and positive magnetic disc brake system is operated by emergency switch control or foot brake All running parts are lubricated by a pressure pump in gearbox Sliding, surfacing, and screw-cutting motions are fully interlocked in the apron A cone-clutch device in the apron to prevent overload Dual speed tailstock quill (ratio 1:1 and 1:4) provides easy drilling operation 4-way power rapid traverse Ampere meter for power consumption monitoring Jog button for easy spindle speed changes 20 HP main motor Tough built to last with large 4-1/8" spindle bore, 4-way rapid traverse, and 20 HP main motor. The best in its class to handle upmost demanding work.

ورقة المواصفات

Swing Over Bed Ways................................29-1/8" Swing Over Cross Slide.............................20-1/2" Swing In Gap.......................................37-25/32" Cross Slide Travel.................................16-1/4" Compound Travel....................................8-1/4" Bed Width..........................................16-1/2" Center Distance....................................80" Spindle Hole.......................................4.13" Spindle Speeds (12)................................15 To 1,200 Rpm's Spindle Nose.......................................D1-11 Chuck Size New Gator...............................20" 4-Jaw W/2 Piece Jaws Feeds Cross........................................0.0004 To .0118"/ REV Feeds Long.........................................0.0012" TO .0287" / REV Threads Inch (45)..................................2 To 56 TPI Threads Metric (31)................................0.05 To 13 MM D.P................................................2 T 160 T.P.I. Module.............................................0.5 To 40 Lead Screw Diameter And Threads....................1.97" / 2 TPI Tail Stock Quill Diameter..........................4.1" Tail Stock Quill Travel............................7" Tail Stock Taper...................................#5 Morse Main Motor.........................................20 Hp. Floor Space........................................R-L 140" X F-B 72" Machine Height.....................................72" Machine Weight.....................................9,250 Lbs. Coolant Pan........................................Yes Harden & Ground Ways...............................Yes Foot Brake.........................................Yes Rapids On Longitudinal Travel......................Yes Note: Machine has been cleaned, painted and cylced. New belts, Headstock and apron flushed and cleaned and new oil. Optional Equipment: Prices subject to change without notice: Taper Attachment Installed........................$7,450.00 Newall 2 Axis D.R.O. System Installed.............$5,450.00 Aloris Type Tool Post & 5 Holder..................$1,950.00 New Gator 18" 3-Jaw Chuck With Two-Piece Jaws.....$3,975.00 Used Chuck 18" 6-Jaw..............................$3,250.00 Prices subject to change without notice:

عن البائع

معلومات وجهة نظر الشركة

اطلب اقتباس

وأضاف لطلب قائمة

الطلب المقدم 2024-12-18