مطاحن العموديSHARP LMV-49-DVS
California, الولايات المتحدةنظرة عامة
ماركة
نموذج
بطاقة تعريف #
490887
يكتب
حالة
الجديد في المخزن
سنة
2023
موقع
California
الولايات المتحدة
الولايات المتحدة
مخزون #
1002
SHARP DVS Pkg Variable Speed Vertical Knee Mill Model LMV-49K Travel 12" x 36.6" Table 9" x 49"
STANDARD EQUIPMENT:
3HP Motor
• Digital Variable Speed Drive
• R-8 Spindle
• Meehanite Casting
• Chromed Ways
• Self-Lubricating Motor Shaft Extends Pulley Life
• Abec-7 Super Precision Spindle Bearings
Power Feed Table
3 Axes Digital Readout System
• Hard-Chrome Ways And Gibbs
• Precision Ground And Flaked Table
• Unique Double Nut Backlash System
• Cutler Hammer On/Off Switch
• Front And Rear Way Covers
• One Shot Lube System (X , Y , Z Axes)
• Tool Kit Includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set Of 6 Allen Wrenches, Philip Screw Driver, Flat Head Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin For Indicator, Can Of Paint
• Wired 220V or 440V. Please Specify. (Note: 440V requires additional transformer, 220 V single phase is available)
تحويل المواصفات إلى الامبراطوري
الجدول-W | 228.6 mm |
الجدول-L | 1,244.6 mm |
مجال الحركة الطولية | 929.64 mm |
مجال الحركة القطعية | 304.8 mm |
القدرة | 2.2 kW |
RPM | 0 RPM |
انحناء | R-8 |
أبعاد | 7’W x 6.5’D x 6.75’H |
وزن | 2,100 lbs |
مجهزة
FEATURES:
• 3HP Motor
• Digital Variable Speed Drive
• R-8 Spindle
• Meehanite Casting
• Chromed Ways
• Self-Lubricating Motor Shaft Extends Pulley Life
• Abec-7 Super Precision Spindle Bearings
Power Feed Table
3 Axes Digital Readout System
OPTIONAL ACCESSORIES:
440 V Transformer - 3HP
Auto Lube Pump w/ 2 adjustments
6" Kurt Vise with Swivel Base D688
Right Angle Milling Attachment with Arbor
Drill Chuck & Drill Arbor
Coolant system with chip pan
Maxi Torque Rite Power Draw Bar
Riser block (4”, 7”)
R-8 Collet Set of 11 (1/8"-3/4" by 1/16")
Clamping Kit
Halogen work light
Spare Kit
Features, Function, & Benefits:
ISO 9002 Certified:
Quality Up To World Industry Standards.
Meehanite Casting:
Highest Grade Of Casting Possible.
A Pair Of Precision ABEC-7 Angular Contact Bearings To Support Spindle. The Quill Is Ground And Chromed To Fit The Housing:
This Insures A Spindle Run out Of .0004” T.I.R.
Motor Shaft And Varidrive Pulleys Are Dynamically Balanced, Then Chromed For A Flawless Fit, Ground Ribs On Inside Diameter:
For Smooth Speed Changes.
Motor Shaft Has An Oil Channel In The Center That Is Fed By A Grease Fitting On The Lower End:
To Keep Vari-Drive Pulley Moving Smoothly On The Shaft.
This LMV-49DVS Mill Uses A Roller Bearing For The Lower Support Of The Shaft
It Ensures Proper Loading, Support And Alignment It Also Prevents The Shaft From Being Distorted By The Tension Of The Belt:
For Quiet, Accurate Operation At Any Speed For Years And Years.
One Shot Lubrication System:
For Lubrication Of Ways And Lead Screws. (X,Y And Z-Axis)
Hand Scraped Saddle And Knee:
For Better Oil Retention. It Avoids Having Chips And Dirt Embed In The Knee And Damage The Sliding Surface.
Oil Groove Are Milled:
For Maximum Lubrication On All Wear Areas.
Table And Saddle Backlash Is Controlled By Double Nut Design:
Keeps Lead Screw In Contact With Bronze Nuts An All Times To Keep Backlash At .0008” Within 20”.
Table And Saddle Are Mounted With Thrust Bearings That Are Pre-Loaded:
Eliminating Endplay For Precisely Controlled Lateral Movement.
Patient Knuckle Design Uses 6 Bolt 3 Per Side, Securing Them From The Outside:
This Method Locks The Head Securely Resulting In Better Accuracy And Performance.
ورقة المواصفات
SPECIFICATIONS
Table
Working Surface 9” x 49”
T-Slots Number and Size 3 Slots, 5/8”
Capacity
Travels (X, Y, And Z) 36.6” x 12” x 5”
Ram Travel 12”
Knee Travel 16”
Spindle To Column (Min-Max) 6-3/4”-18 1/2”
Spindle Nose To Table (Min-Max) 2-1/8”-18”
Spindle
Spindle Motor 3 HP
Spindle Nose Taper R8
Digital Variable Speed Drive ( DVS) 65- 4500 RPM
Quill Feed 3 Speed (IPR) 0.0015,0.003, 0.006”
Head Swivels 360°
Head Tilt (Lt. To Rt) 45°
Head Tilt (Up And Down) 45°
SHARP LMV-49K-DVS PACKAGE VERTICAL MILL
WITH
3-AXIS DIGITAL READOUT (quill, saddle, table)
DIGITAL VARIABLE HEAD (DVS)
TABLE POWER FEED
TABLE
Working surface 9” x 49"
T-slot number, size 3, 5/8"
CAPACITY
Table travel (X,Y,Z) 36.6" x 12" x 5"
Ram travel 12"
Knee travel 16"
Spindle to column (min-max) 6 3/4" - 18-1/2"
Spindle to nose table 2 1/8” - 18"
SPINDLE
Motor 3 HP
Spindle Nose Taper R-8
Digital Variable Speed 60 ~ 4,500 RPM
Quill feed (IPR) 0.0015”, 0.003”, 0.006"
Head swivel 360º
Head tilt; right-to-left (each way) 45º
Head tilt up-and-down (each way) 45º
رؤية المزيد من العقارات المعروضة من هذا النموذج
SHARP LMV-49-DVS
مطاحن العمودي