TARNOW TUJ 560 MEF X 2000
- 規格參數轉換為英制回轉直徑560 mm頂尖間距1,960 mm主軸孔徑105 mm功率11 kW主軸轉速2,000 RPM橫拖板上最大回轉直徑340 mm控制系統數控 (Fanuc)外形尺寸3690x1580x1620重量3350
- 產品概述
Lathes machines TUJ-560/630 MEF with Fanuc Power 0i Mate-TC control system are intended to execute general turning operations for piece and lot production. Machine rigid construction, high power of driving motor and applied rolling screw for slides drive, ensures a great capacity and machining accuracy. Control system enables work in conventional way (using manual handwheel), or semi automatic with manual correction of cutting depth for each cut and automatic by recording machining cycle, setting a cutting depth and starting the cycle.
Most of the elements used by operator during turning operations is spaced on a control desk slidable along the bed. Additional display of the control desk enables simple setting of all essential parameters like: spindle speed, rate of travel, programming and cycle selection. Operator can see on the display entered parameters and tool position therefore he can go on with machining operations. Spindle speed synchronization with slidable motor revolutions in axis Z allows executing a wide range of various threads.
Typical machining cycles available:- Machining cycle acc to inserted geometry of machined surface
- Taper cycle
- Threading cycles: outer and inner threading, outer thread repair
- Grooving cycle
- External ball cutting cycle
- Drilling and tapping cycles
- Facing cycle
Possibility of operating CNC and manual mode.Tool selection and tool offset functions are available as well as constant cutting speed.
There also exist a possibility of connecting an external personal computer by RS-232C interface.
- 關於公司
We would like to briefly introduce our company, whose name Fabryka Maszyn (Machine faktory) "Tarnow" appeared in the fall of 2010. The creation of the company was associated with organizational transformations in Zakłady Mechaniczne Tarnów S.A. Production of civilian functioning under the name of Zakład Produkcji Obrabiarek, Narzędzi, Oprzyrządowania i Remontów has been separated from the company. Fabryka Maszyn "Tarnow" continued production of machine tools known at home and abroad, such as lathe-380MF TUJ, TUJ-380CNC, TUJ-560M, 630M-TUJ, TUJ-560MEF, TUJ-630MEF and grinder RUP280 for cylindrical shafts and holes. The company also provided maintenance services and spare parts for older lathes TUB-25, TUB-32, TUJ-48, TUJ-50, TUJ-50M, TKX-50N and grinders RUP-28 and ROPA16. Seized civilian production area also included the production of tools, equipment and services, machinery and equipment maintenance, as well as production of licensed lathes for German company GDW: LZ-250, LZ-360, LZ-400. The next stage in the history of the FMT was the privatization of companies with foreign capital, where the group was English 600 GROUP PLC-UK that owns the well-known machine tool Colchester-Harrison. Quickly implemented and launched production of a wide range of products Colchester-Harrison lathes such as the M300 / Student, Master, Triumph, Mascot, Mastiff, Alpha sold in the extensive distribution network of 600UK. After nearly two years the English industrial group withdrew from further investment in Tarnow Machinery Factory, and the new owner of the FMT was a German company GDW, which then continued producing mainly products on their markets like Turing machines LZ 360, LZ400 and licensed 600UK lathes T170, T200, T230, T280. In mid-2013 the company was declared bankrupt. The company was bought by a Polish investor and now operates under the name Fabryka Maszyn "Tarnów" Łukasz Świderski & Józef Świderski S.C. The main objective of the company is the desire to rebuild and continue the domestic production of machine tools based on structural and technological documentation and harvested machine park.“