LAPMASTER 12
- 規格參數轉換為英制加工能力304.8 mm外形尺寸25"L x 18"W x 24"H重量240 (LBS)
- 產品概述
The Lapmaster Model 12 is a bench mounted unit with a rigid, lightweight, cast aluminum base. The machine is of the “ring lapper” configuration, enabling high standards of flatness and surface finish to be routinely achieved. In-process lap plate flatness control is provided for by three conditioning rings which locate in yoke/rollerbearing assemblies. Workpieces are located within carriers or appropriate fixtures which run within the rings. Large parts of cylindrical shape can be substituted for the rings.
The Model 12 is equally at home in the laborator y or the production shop. In the laborator y, the Model 12 can be used to process a wide variety of materials on an experimental basis. These results can then be applied to a production situation.
In the production shop, the Model 12 is ideally suited for lapping either low or high production jobs. In-shop lapping reduces individual component cost and equipment maintenance expense. Worn parts are reconditioned and salvaged thus reducing scrap. Valve bodies, discs, gears, vanes, valve plates and shaft seals are only a few of the components benefiting from the lapping process.
- 關於公司
經銷商 和 銷售辦事處
- 經銷商4Daunert Maquinas-Herramientas
C/Tirso de Molina esq. Alberto Einstein
Pol. Ind. Almeda Cornella de Llobregat
Barcelona 08940
西班牙 - 銷售辦事處2LAPMASTER WOLTERS China (Shenyang)
No.3A-2
No.8Shenyang Economic & Technological Development Area
Shenyang, Liaoning 110027
中國