The No. 14 Straight Bevel Coniflex® Generator is an automatic machine for cutting straight bevel Coniflex gears. A wide range of work is covered - gears up to 24" in diameter at 10 to 1 ratio, 3½" face width and 3 diametral pitch. This generator is a two tool machine employing side-cutting tools, which operate alternately on opposite sides of the gear tooth being cut. The No. 14 Straight Bevel Coniflex Generator offers many advantages: improved quality of product, increased production, ease of setup and operation, and simplified calculations and development.

規格

參數轉換為英制

齒輪最大直徑	609.6 mm
Maximum Face Width	88.9 mm
Diametral Pitch	3
Maximum Cone Distance	304.8 mm
Extreme Ratio	101
Number of Teeth	0
Control Manufacturer	Conventional
方面	76" x 56"
重量	14,800#

配備

Coniflex Gauges Change Gear Cabinet Hydraulic Work Clamping Stock Divider Cutter Block Rough/Finish Feed Cam Draw Bar Chip Basket Hydraulic System Coolant Pump

規格表

Specifications: Gear Diameter: up to 24" Cone Distance (Maximum): 12" Cone Distance (Minimum): 0 Extreme Ratio: 10:1 Diametral Pitch (coarsest): 3 DP Index Range: 5 to 100 inclusive and most numbers up to 200 Diameter of Taper Hole at Large End: 3 29/32" Taper per Foot: 39/64" Depth of Taper: 6" Diameter of Hole Through: 3 1/16" Spindle Nose to Machine Center: 2 1/2" x 15" Cutter Speeds (Strokes per Minute): 64 to 495 Feeds (Seconds per Tooth): 10 to 131 Main Motor: 3 H.P., 1800 RPM Floor Space: 76"x56" Net Weight: 14,800 lbs.