剪板機METAL MUNCHER PS4800
Utah, 美國總覽
參數轉換為英制
最大加工厚度 | 9.525 mm |
可剪寬度 | 1.2 m |
液壓/機械 | Hyd |
後擋料尺寸 | 914.4 mm |
功率 | 18.6 kW |
尺寸 | 36" x 104" 90" |
重量 | 8,000 Lbs |
規格表
Model PS4800
Made in USA
Capacities 1″ x 18″ wide, 3/4 x 24″ wide, 1/2 x 36″ wide, 48″ wide on anything 3/8 or less thick
25 horsepower motor
Can go 220/230/240 or 440/460/480 volt 3 phase power
52″ long blades
5 hold down cylinders
Filtered hydraulic system
23 gallon per minute main pump
5″ bore cylinder
Can be controlled by Foot Control (auto return to top) or Push Button Control (stops wherever button released up or down)
Our forklifts handled it from beneath, no problem
Blades look good
Squaring arm on left side
NEMA enclosure for electrical components
Vickers hydraulics and Square D electrical (these parts can be purchased at a local industrial supply, so no tricky parts)
Grease Banks for convenient lubrication throughout, and kept greased by owner
Pins, gibs, and slides look good
21 x 50 work table area
Adjustable stroke set with limit switches on back of machine
All guards and covers in place
Shipping size 9 ft 3″ long, 38″ wide 89 to 93 high, depending on cylinder retracted or extended
Weight 8000 lbs