8" X 16" TSCHUDIN "SWISS"   SUPER-PRECISION UNIVERSAL CYLINDRICAL GRINDER   ** REBUILT & UPDATED BY "REWITECH" IN SWITZERLAND, 05/2005 **     ** ACQUISITION COST IN 2005 WAS 78,500 EUROS **        www.rewitech.ch                                                         MODEL: HTG-400       S/N: 75-77                                                              TABLE:     NOMINAL SWING ............................ 8"                                                   DISTANCE BETWEEN CENTERS ................. 16"   TABLE SPEED .............................. 0 TO 195" IPM   TABLE DWELL .............................. 0 TO 6 SECONDS   SWIVELLING RANGE ......................... +/- 11 DEGREES   WHEELHEAD:                                                 WHEEL SIZE .......................... 14"DIA. X 2"W X 5"BORE   SWIVELLING RANGE ......................... +/- 5 DEGREES   MOTOR .................................... 4 HP   SPINDLE SPEEDS (3) .................. 1,640, 1,940 & 2,300 RPM   WHEELHEAD INFEED;   RANGE OF PLUNGE FEED DIAMETER    REDUCTION PER MINUTE .................... 0.0005" - 0.200"   AUTOMTIC INFEED OF THE GRINDING    WHEEL PER TABLE REVERSAL, MINIMUM   INFEED INCREMENT  DIAMETER REDUCTION ..... 0.000050"   DIA. REDUCTION PER REV. OF    INFEED HANDWHEEL ........................ 0.080"   HANDWHEEL GRADUATION READS TO ............ 0.0001"   TRAVEL BY USING THE HANDWHEEL ............ 1.8"   RAPID APPROACH, AUTOMATICALLY ............ 1.5"   MOVEMENT OF WHEELHEAD SLIDE    BY HANDWHEEL ............................ 1.8"   TRAVEL OF THE WHEELHEAD SLIDE INFEED,    AUTOMATICALLY ........................... 0 TO .050" ON DIA.   INFEED SPEED, MAXIMUM .................... 1.2"/MIN.   SPARKOUT ................................. 2 TO 30 SECONDS   WORKHEAD:                                                   SPINDLE TAPER ............................ #5MT     SWIVELLING RANGE ......................... 360 DEGREES     INFINITELY VARIABLE SPINDLE SPEED ........ 65 TO 500 RPM     TAILSTOCK:                                                  TAPER OF CENTER BORE ..................... #3MT     TRAVEL OF CENTER ......................... 0.8"    APPROXIMATE MACHINE DIMENSIONS ......... 60"L X 48"D X 58"H   APPROXIMATE WEIGHT ......................... 4,400 LBS                                                             MACHINE FEATURES::                                              TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO            STEEL BEARING WHEELHEAD DESIGN                           SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS          FOR TRAVERSE & PLUNGE GRINDING CYCLES                    HYDRAULIC OPERATION FEATURING:                              -POWER TABLE TRAVERSE                                    -AUTOMATIC INFEED                -DUAL RATE INFEED OPTION                                  -PLUNGE INFEED                                            -RAPID WHEELHEAD ADVANCE AND RETRACTION                   SPARKOUT TIMER                                             TSCHUDIN "STANDARD" WORKHEAD w/DUAL LIVE & DEAD SPINDLE                                EQUIPPED WITH: ELECTRICAL CABINET ON MACHINE, NOT SEPARATE HYDRAULIC RESEVOIR IN BASE, ISOLATED & SEPARATE,   UPDATED IN 2005 COOLANT SYSTEM WITH PAPER FILTRATION QUICK ACTING LEVER-TYPE COLLET CLOSER.  USES W25 COLLETS THIS WORKHEAD HAS THE LARGER BORE, #5MT SPINDLE SWING BACK DIAMOND WHEEL DRESSER "ELASO" MODEL EB200, S/N: 100828, AUTO WHEEL BALANCING    SYSTEM, MADE IN SWITZERLAND   HEIDENHAIN 2X DIGITAL READOUT, INCH & METRIC HANDWHEELS ON MACHINE ARE METRIC RAPID COARSE HANDLE FOR RAPID MANUAL ADJUSTMENT   OF THE WHEELHEAD SLIDE POSITION THIS MACHINE CAN ACCEPT A SWING DOWN I.D.   GRINDING ATTACHMENT GRINDING WHEEL PRESENTLY ON THE MACHINE   IS 14" DIA. x 1.25"W x 5" BORE DIAL INDICATOR FOR TABLE TAPER ADJUSTMENT TABLE STOP SET-UP ACCESSORY ELECTRICAL SYSYTEM UPDATED IN 2005, BEAUTIFULLY EXECUTED. 3/50/220-380 VOLT ELECTRICS TRANSFORMER FOR 500 VOLTS TO 3/400 VOLTS, 50Hz-60Hz                                                                                         * *  EXCEPTIONAL CONDITION & APPEARANCE - WOW!  * * ** REBUILT & UPDATED BY "REWITECH" IN SWITZERLAND, 05/2005 ** ** ACQUISITION COST (ANSCHAFFUNSKOSTEN) IN 2005 WAS 78,500 EUROS ** * * INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE * * FOR MORE INFORMATION: Call Andy at 973-497-7600