銑端面和打中心孔機床HEY -- UNSPECIFIED --
印度總覽
HEY NO. 3 FACING AND CENTERING (6″ x 51″)
參數轉換為英制
| 加工能力 | 203.2 mm |
| 頂尖間距 | 2,819.4 mm |
規格表
HEY NO. 3 6″ X 51″ FACING & CENTERING MACHINE
Maximum diameter of work: 6.25”
Minimum diameter of work: .25”
Maximum workpiece length: 51”
Minimum length of work: 3”
Maximum swing over bed: 21”
Spindle speeds: 18 to 980 RPM in 18 steps
Length of fine adjustment to cutter: 2”
Feed rates in thousandths of an inch per rev. of spindle: (8) steps 0.001 to 0.017 IPR
Rapid traverse rate: 250”/min.
Spindle drives: 7.5 HP each
Electrics: 3/50/415 volt
