* Machine is actually equipped with an old CNC Control made by SIEMENS, model 3 G However this control unit is not working because the processor was taken out. Therefore the machine would be ideal for reconditioning. Electronic Handwheel. The CNC-Control allows all Hobbing operations also suitable for tapered and crowned Gears * Universal hobbing head with ISO 50 Taper and Automatic hob shifting. * Hob Shift adjustment can be preset by the CNC Control. * 2-cut device for roughing and finishing and Automatic run-out device for higher cutting values * Radial / axial quick feed and table quick feed. * Differential drive for helical gears. * 4 hob mandrels, various sizes. Continuously lubricated counter bearing. * Coolant intermediate tank mounted on the machine’s backside. Table rinsing pipes * Workpiece counter bracket, which can be retracted approx. 150 mm to increase WP swing-Ø, eqquipped with a tailstock for center and as a 3 roll stead rest for supporting long shafts. * Backlash free hobbing head, separate Cooler for the Hydraulic Oil, Amperemeter for Hobdrive,

Max. gear Æ (without counter bracket) 1000 mm Max. gear Ø with counter bracket 750 mm Hobbing length (increased 200 mm) 700 mm Module, max. 14 Max. Workpiece Weight 3.150 kg Minimum no. of teeth (index gear box ratio 1:144) 6 Distance between toolcenter and workpiece center 60 -625 mm Mounting height in counter bracket, approx. 1.100 mm Table Ø x Table bore 780 x 180 mm Table speed 0,7 - 16 rpm Hobbing slide swivelling approx. 240 ° Hob Ø x length 210 x 240 mm Hob mandrel Ø x taper sk50 Hob shifting, max. approx. 200 mm Hob spindle speeds, infinitely variable 25 - 235 rpm Feed range, axial, infinitely variable / quick feed 1 – 750 /750 mm/Min. radial, infinitely variable / quick feed 1 – 250 /250 mm/Min. tangential, infinitely variable / quick feed 1 – 140 /280 mm/Min. Spindle drive, approx. 30 kW Total electrical load, approx. 40 kW - 380 V - 50 Hz Weight of machine, approx. 13,000 kg