走心式自动车床HANWHA XD32H
美国总览
Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 – Low Hours, MTA Bar Feeder
将参数转换为英制
主轴孔径 | 32 mm |
主轴转速 | 8,000 RPM |
功率 | 7.5 kW |
轴数 | 5 |
规格表
Machining Capacity:
Maximum Bar Capacity Round: 1.250”
Maximum Bar Capacity Hex: 1.062”
Maximum Bar Capacity Sub-Spindle: 1.250”
Tapping Capacity Main Spindle: 0.312”
Front Ejection from the Sub-Spindle: 3.000”
Rear Ejection from the Sub-Spindle: 11.000”
Drilling Capacity on the Sub-Spindle: 0.393”
Tapping Capacity on the Sub-Spindle: 0.312”
Drilling Capacity on the Cross Drill: 0.275” / 0.393”
Tapping Capacity on the Cross Tap: 0.250”
Main Spindle:
Spindle Speed: 300 to 8,000 RPM
AC Spindle Drive Core Motor (Chilled): 7.5 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z1-Axis Horsepower: 2.0 HP
Z1-Axis Stroke: 12.500”
Z1-Axis Rapid Traverse: 1,200 IPM
Sub-Spindle:
Spindle Speed: 300 to 7,000 RPM
AC Spindle Drive Core Motor: 3 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z2-Axis Stroke: 12.500”
Z2-Axis Rapid Traverse: 1,200 IPM
Z2-Axis Horsepower: 2.0 HP
Cross Working Spindles:
Spindle Speed: 200 to 6,000 RPM
AC Spindle Drive Geared: 1.7 HP
Tool Position:
O.D. Tool Positions:5
O.D. Tool Shank: 0.625” Sq
Cross Mill / Drill Stations: 4
Main Spindle I.D. Tool Positions Total (ER-16 Type): 7
-5 Stationary from the Main Tool Stand
-2 Powered Face Mill / Drill stations independent from the Main Tools
Sub-Spindle I.D. Tool Positions Total (ER-16 Type): 9
-5 Stationary from the Main Tool Stand
-2 Stationary Independent from the Main Tools
-2 Gear Driven Independent from the Main Tools to 6,000 RPM
Coolant / Lubrication Systems:
Coolant Pump Motor: 0.6 HP
Coolant Tank Capacity: 45 Gallons
Way Lube Tank Capacity: 0.48 Gallons
Machine Dimensions: 65″W x 94″L x 69″H
Weight 9,500 LBS
General Specifications:
Voltage: 3 Phase 200V-220V
Power Required: 30 KVA
Compressed Air: 80 PSI
Equipped With:
– MTA Eagle Bar Feeder
– Fanuc 18iTB System 2 Path
– Full C-Axis, Both Main and Sub Spindles
– Rigid Tapping
– Cross Drilling Unit
– Part Conveyor
– Part Separator
– Air Blow Unit
– Assorted Collets and Tooling