Wellsaw V20F-24 Vertical Bandsaw 20" throat x 24" high As of June 2017 the Wellsaw Model V20F will come standard with Variable Frequency Motor Controller in place of the variable speed pulleys. The controller is the high efficiency Vector type and is extremely reliable. The blade speed is adjusted with a control knob. The saw also has the high/low range gearbox providing a wide range of bandspeeds. Worklight and 90 degree roller guide standard

规格

将参数转换为英制

喉口尺寸	609.6 mm
工件最大高度	406.4 mm
功率	2.2 kW
锯条宽度	0.8035 mm
锯条长度	4,495.8 mm
进给速度	Low Range High Range 45-400 SFPM 325-3000 SFPM
方面	Floor Area Height Standard V-20-24 32" Wide x 48" Deep 83-1/2" 91-1/2
重量	1,050 lbs

配备

Standard Features Heavy Tube Steel Frame Precision Ground Cast Iron Table with Replaceable Throat Plate Unique Heavy Duty Roller Guides Rotate 90° to Accommodate Long Materials Baldor® Motor Magnetic Starter with Undervoltage and Overload Protection 115 Volts at Controls Two Speed Cast Iron Gearbox with Helical Gears and Oil Bath Lubrication for Quiet Operation Blade Speed Indicator Blade Tension Indicator Flexible Arm Worklight Chip Blower (Shop Air) Removable Chip Tray Tiger-Tooth® Bi-Metal Blade OSHA Blade Guarding Rotary Blade Brush Options for consideration: Installed at time of manufacture Combination Miter Gauge & Rip Fence 1,058.00 Rip Fence, 26” 561.00 Miter Gauge 705.00 1" blade Option 101.00 Sealed Electrical Enclosure for Sawing Graphite and Aluminum 935.00 Vacuum Nozzle 175.00 Blade Welder, Grinder and Shear (made in Germany) $3,497.00 Leveling/ Vibration Mounts / set of four 91.00 Table Extension, side, 26” x 26” w/ leg 415.00 Table Extension (shelf), front, 26” x 12” * 305.00 * Not used with Rip Fence/Miter Gauge Option Spare Parts Kit …………………………………………………………………423.00 Spare Blades, Bi-Metal package of six 615.24 Fused Disconnect/ Lever Type/ NEMA 1 837.00 OR Fused Disconnect/ Rotary Type/ NEMA 12 897.00 Gravity Roller Conveyor, 18” x 5 ft 795.00 Gravity Roller Conveyor, 18” x 10 ft 1,447.00 Stock Stand, single roller 18” 217.00 Lubrication Spray Mist Lubricant System (water based) 887.00 Lubricant for Spray Mist (one gallon, water soluble) 38.57 OR Micro Lubricant System (oil only system) 960.00 Lubricant for Micro System / one gallon 71.00 Stick Lubricant 25.05 Consult Factory for Additional Options Prices subject to change without notice.

规格表

Specifications Capacity Throat Table to Guide V-20-24 20" Deep 16" High 24" High Blade Size Standard Optional 3/16" through 3/4" 1/2" through 1" (This Option Not Available on V-20-24) Blade Length V-20-24 14'9" (177") 16'1" (193") Band Wheels 21" Cast Aluminum with Replacable Rubber Tires Blade Speeds Low Range High Range 45-400 SFPM 325-3000 SFPM Blade Guides Sealed Ball Bearings with 90° Rotation Feature Table Size Tilt Height 26" x 26" Cast Iron 5° Inside and 45° Outside 37-1/2" Drive Motor Three Phase Single Phase 3hp 208/230/460 Volt 2hp 115/208/230 Volt Floor Area Height Standard V-20-24 32" Wide x 48" Deep 83-1/2" 91-1/2"