KAPP CX I
- 사양사양을 영국 표준식으로 변환최대 기어 지름250 mm제어CNC
- 제품 개요
Coroning is mainly designed for high-volume and mass production of internal spur and helical gears with interfering geometry, a module range of 0.8 to 3.5 mm, a tip diameter of max. 250 mm and a face width of up to 50 mm. Coroned gears offer the advantage of functional flank topology and optimum gear noise characteristics. There is no risk of thermal material damage and due to increased residual compressive stresses the inclination of wear decreases.
Coroning causes a material abrasion by means of the electronically coupled relative movement of gear and gear shaped tool with a cross axis engagement of tool and workpiece. The generating coupling of these directly driven CNC axes reduces geometrical gear errors from the pre-machining phase. Besides, the process and the machine offer short machining times, constant machining quality plus short set-up times. Only non-dressable KAPP tools are used for the coroning process. For the machining of internal gears, external geared tools are applied.
- 회사에 관하여
대리점, 영업부, 서비스 및 수리 숖
- 대리점5Machine Tools (India) Ltd.
Kh. No.284, Sultan Sadan II
West End Marg, Lane No. 3, Saidulajab, Mehrauli
New Delhi, Delhi 110 030
인도Chrystec Machine Tools Pvt Ltd
F-1,Farhaan center ,24/1,Norris road
Facing walker lane,richmond town
Bangalore, Karnataka 560025
인도 - 영업부2
- 서비스 및 수리 숖3