수직형 머시닝 센터HAAS VF-3SS
Colorado, 미국개요
Haas VF-3SS CNC Vertical Machining Center with Midaco Automatic Pallet Changer, Probing, Through Spindle Coolant
Stock: C1003
Manufacturer: Haas
Model: VF-3SS
Age: 2013
MACHINE CONTROL: HAAS 32 BIT CNC
TABLE SIZE: 48" X 18"
MACHINE TRAVELS (X/Y/Z): 40" X 20" X 25"
SPINDLE TO TABLE DISTANCE: 4.2"/29.2"
TABLE CAPACITY: 1750 LBS (EVENLY DISTRIBUTED)
SPINDLE TAPER: CAT 40
SPINDLE SPEEDS: 12,000 RPM MAX
TRANSMISSION: DIRECT DRIVE
RAPID TRAVERSE RATE (X/Y/Z): 1400 IPM
MAXIMUM CUTTING FEED RATE: 833 IPM
TOOL CHANGER STYLE: SIDE MOUNT, TWIN ARM
TOOL CHANGER CAPACITY: 24+1
SPINDLE DRIVE: 30 HP
POWER REQUIREMENT: 208/240V, 3HP
Equipped With:
Haas MainCon CNC Control, 12,000 RPM Max Spindle Speed, 24 Station Automatic Tool Changer, Midaco A40SD Series Automatic Pallet Changer with Mitsubishi Touch Screen PLC Controller, (2) 19" x 40" Work Pallets, Haas Probing System with Tool and Parts Probes, 300 PSi Through Spindle Coolant, Muliti-Auger Chip Auger System, Rigid Tapping, Coolant Pump and Tank
Electrics:
195-260 Volt, 3 Phase
사양을 영국 표준식으로 변환
X | 1,016 mm |
Y | 508 mm |
Z | 635 mm |
동력 | 22.4 kW |
분당 회전속도 | 12,000 RPM |
# ATC | 24 |
테이블-W | 457.2 mm |
테이블-L | 1,219.2 mm |
테이퍼 | CT or BT 40 |
제어반 | CNC (Haas 32 Bit CNC Control) |
장착
Equipped With:
Haas MainCon CNC Control, 12,000 RPM Max Spindle Speed, 24 Station Automatic Tool Changer, Midaco A40SD Series Automatic Pallet Changer with Mitsubishi Touch Screen PLC Controller, (2) 19" x 40" Work Pallets, Haas Probing System with Tool and Parts Probes, 300 PSi Through Spindle Coolant, Muliti-Auger Chip Auger System, Rigid Tapping, Coolant Pump and Tank
Electrics:
195-260 Volt, 3 Phase
스펙 시트
Haas VF-3SS CNC Vertical Machining Center with Midaco Automatic Pallet Changer, Probing, Through Spindle Coolant
Stock: C1003
Manufacturer: Haas
Model: VF-3SS
Age: 2013
MACHINE CONTROL: HAAS 32 BIT CNC
TABLE SIZE: 48" X 18"
MACHINE TRAVELS (X/Y/Z): 40" X 20" X 25"
SPINDLE TO TABLE DISTANCE: 4.2"/29.2"
TABLE CAPACITY: 1750 LBS (EVENLY DISTRIBUTED)
SPINDLE TAPER: CAT 40
SPINDLE SPEEDS: 12,000 RPM MAX
TRANSMISSION: DIRECT DRIVE
RAPID TRAVERSE RATE (X/Y/Z): 1400 IPM
MAXIMUM CUTTING FEED RATE: 833 IPM
TOOL CHANGER STYLE: SIDE MOUNT, TWIN ARM
TOOL CHANGER CAPACITY: 24+1
SPINDLE DRIVE: 30 HP
POWER REQUIREMENT: 208/240V, 3PH