범용 머시닝 센터DROOP & REIN HMC 275
Illinois, 미국개요
8 Axis, 40' X Travel, 2000 Retrofit and Upgrade, Heidenhain TNC 430, CNC 118" x 149" Rotary table, Angular milling attachment w/90hp drive, Speeder attachment, 60 station ISO 50 tool changer, Chip conveyor
사양을 영국 표준식으로 변환
X | 12,192 mm |
Y | 2,997.2 mm |
Z | 1,016 mm |
#축 | 8 |
동력 | 67.1 kW |
분당 회전속도 | 1,500 RPM |
# ATC | 60 |
테이퍼 | 50 |
스펙 시트
One (1) Droop & Rein Model HMC 275, 8 Axis CNC 8” Horizontal Boring Mill
Specifications:
Spindle Diameter----------------------------------------------------------------------------------------------------- 8”
Spindle Speed------------------------------------------------------------------------------ 5 to 1500 RPM (140 HP)
Spindle Taper-------------------------------------------------------------------------------------------- 60 and Cat 50
Travel X-Axis--------------------------------------------------------------------------------------------------------- 40’
Travel Y-Axis------------------------------------------------------------------------------------------------------- 115”
Travel W-Axis-------------------------------------------------------------------------------------------------------- 48”
Combined W Ram & Z Spindle Travel ------------------------------------------------------------------------- 88”
Travel Z-Axis--------------------------------------------------------------------------------------------------------- 40”
Feeds: X Axis------------------------------------------------------------------------------------------- 0.01 -240 IPM
Feeds: Y Axis-------------------------------------------------------------------------------------------------------------
Feeds: W Axis------------------------------------------------------------------------------------------- 0.01 -240 IPM
Feeds: Z Axis------------------------------------------------------------------------------------------ 0.01 – 240 RPM
Equipped With:
Rotary table (B Axis 0.001°)----------------------------------------------------------------------------- 118” x 149”
B Axis Feed range @ 137” Dia.------------------------------------------------------------------------------ 346 IPM
Control ------------------------------------------------------------------------------------------ Heidenhain TNC 430
Angle Plates (2)--------------------------------------------------------------------- 49” (W) x 60” (D) x 120” (H)
Angular milling attachment---------------------------------------------------------------------- 90 HP, 1500 RPM
Speeder attachment
60 station ISO 50 tool changer
Thru Spindle High Pressure Flood Coolant systems
Chip conveyor
Major Machine Modification & Repairs
1.) Ball screws (80 mm)
2.) Indramat axis motors and drives
3.) Turcite anti-friction material and Tychoway linear bearings on X axis
4.) Lubrication systems
5.) Speeder Attachment (Max. Speed 6,000 RPM)
6.) Head balance system
7.) Axis feed back systems
8.) Fabric bellow covers on ‘Y’ axis
9.) Steel telescopic covers on ‘X’ axis
Features that were reworked during the 2000 Retrofit and Upgrade
Ram and spindle configuration
All electric’s
Renishaw tool probing
Thermal compensation ‘X' and 'Z' axis.
Catalogue Specifications. Information is believed to be correct but purchaser is advised to verify information by inspection.
Additional info:
Specifications and Work performed during Upgrade:
Major Machine New Features
1.) CNC 118" x 149" Rotary table
2.) Angular milling attachment w/90hp drive
3.) Speeder attachment
4.) 60 station ISO 50 tool changer
5.) Chip conveyor
Major Machine Modification & Repairs implemented in the year 2000.
1.) Ball screws
2.) Indramat axis motors and drives
3.) Turcite anti-friction material and Tychoway linear bearings on x axis
4.) Lubrication systems
5.) Coolant systems
6.) Head balance system
7.) Axis feed back systems
8.) Fabric bellow covers on ‘Y’ axis
9.) Steel telescopic covers on ‘X’ axis
Features that have been reworked include the following:
Ram and spindle configuration
All electric’s
Heidenhain TNC 430 control system
Renishaw tool probing
Thermal compensation 'X' and 'Z' axis.
Summary of sizes, Capacities, Speeds and Rates:
Spindle diameter ......................................................................................................................... 8" dia
Ram size (‘W’ axis) .......................................................................................................... 21.6" x 24.8"
Accuracy ‘X’, ‘Y’ axis
Positioning
Per ANSI std b5.54 any 60" length............................................................................................. 0.0002”
Repeatability............................................................................................................................. 0.0001”
Accuracy ‘Z’, ‘W’ axis
Positioning
PerANSI std b5.54 any 60" length................................................................................................ 0.001”
Repeatability............................................................................................................................. 0.0005”
‘Z’ axis (spindle)
Axis travel....................................................................................................................................... 40”
Axis feed........................................................................................................................ 0.01to 240 ipm
Axis rapid ............................................................................................................................... 240 ipm
Speed range .................................................................................................................. 5 to 1500 rpm
Spindle hp................................................................................................................................... 140hp
Hp/rev to max........................................................................................................................... 2hp/rev
Spindle taper................................................................................................................... 60 and cat 50
Max torque at spindle..................................................................................................... 141,000 in lbs.
‘W’ axis (ram)
Axis travel....................................................................................................................................... 48”
Axis feed....................................................................................................................... 0.01 to 240 ipm
Axis rapid ............................................................................................................................... 240 ipm
Combined ram and spindle travel...................................................................................................... 88”
Ram and boring spindle thrust............................................................................................... 17,000 lbs
Type of feed drive ball screw....................................................................................................... 80mm
‘X’ axis specification
Axis travel.................................................................................................................................... 40 ft
Axis feeds ................................................................................................................... 0.01 to 240 ipm
Axis rapid................................................................................................................................ 240 ipm
Type of feed drive ................................................ rack and pinion or ball screw. Eng. approval required.
Thrust continuous duty ........................................................................................................ 17,000 lbs
‘Y’ axis specification
Axis travel.................................................................................................................................... 115”
Axis feeds ................................................................................................................... 0.01 to 240 ipm
Axis rapid................................................................................................................................ 240 ipm
Type of feed drive ball screw .................................................................................................... 100mm
Thrust continuous duty ........................................................................................................ 17,000 lbs
Vertical column
Column size at base approx. .................................................................................................. 84” x 84”
Column weight excluding ram............................................................................................ 48 tons (est.)
Runway
Number of ways ............................................................................................................................... 4
Width over ways............................................................................................................................. 80”
Way width........................................................................................................................................ 8”
Floor plate area approx....................................................................................................... 318” x 180”
Floor plate capacity ........................................................................................................... 156,000 lbs
6. 6.6.) Angle plates (box type) 2 off ............................................................... 120"H x 49"F x 60"D
Control system
Type: ................................................................................................................... Heidenhain TNC 430
Axis: ..................................................................................................................... 8 axis and 1 spindle
Screen: ...................................................................................................................... 14” color screen
Content:
1.2 GB user memory
Qwerty keyboard
Dialog and ISO programming
Remote jog and hand wheel facility
RS 232, RS 422 and Ethernet interfaces.
Features
Non metallic way covers.................................................................................................................. yes
Way covers on x axis .................................................................................................... steel telescopic
Operator platform and ladder ......................................................................................................... yes
Operator work light ........................................................................................................................ yes
Vertically adjustable control
Station .......................................................................................................................................... yes
Spindle sag comp........................................................................................................................... yes
Thermal comp 'Z', 'X' axis ............................................................................................................... yes
60 station auto tool changer ISO 50 ............................................................................................... yes
Through spindle hi pressure, flood
Coolant air blast............................................................................................................. programmable
Via m codes for 3 coolant pressures ............................................................................................... yes
Option considered
Tool probing Renishaw ................................................................................................... optional extra
Speeder attachment
Max speed ............................................................................................................................ 6,000rpm
Max capacity at 1000rpm...................................................................................... 34hp peak 13hp cont.
Auto Drawbar Inc ............................................................................................................................ no
Coolant through spindle ................................................................................................................. yes
Auto mounting................................................................................................................................. no
Angular milling attachment
Capacity .............................................................................................................................. 90hp max
Max speed ........................................................................................................................... 1500 rpm
Auto mounting................................................................................................................................. no
Auto latch mechanism for
Attachments ................................................................................................................................... no
Storage rack for attachments............................................................................................................ no
Chip conveyor ............................................................................................................................... yes
CNC rotary table
Rectangular size table......................................................................................................... 118” x 149”
Capacity loads centered........................................................................................................ 156,800lbs
Fixture locating key ....................................................................................................................... yes
Center bore in table ....................................................................................................................... yes
‘B’ axis specification (table rotation)
Feed range, at 137” nominal dia. ................................................................................ 0.865 to 260 ipm
Rapid motion at 137”dia .......................................................................................................... 346 ipm
Index accuracy .................................................................................................. +/- 3.6 seconds of arc
Index repeatability ............................................................................................. +/- 1.5 seconds of arc
Programming limit .................................................................................................... 0.001 of a degree
‘U’ axis specification (linear table travel)
Axis travel.................................................................................................................................... 118”
Axis feeds ................................................................................................................... 0.01 to 393 ipm
Axis rapid................................................................................................................................ 393 ipm
Type of feed drive ball screw..................................................................................................... 125mm
Positioning accuracy ....................................................................................................... 0.000118”/40”
Repeatability ................................................................................................................... 0.00078”/40”
Est. total weight as detailed 250 tons (550,000 lbs)
이 유형의 게시 목록 더 보기
MAHO MH-700C
범용 머시닝 센터
DMG DECKEL MAHO DMC60T RS3
범용 머시닝 센터
SPINNER U5 620
범용 머시닝 센터
DECKEL MAHO DMU 50
범용 머시닝 센터
이 브랜드에 대한 게시 목록 더 보기
DROOP & REIN
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)