MILESTONE INSTRUMENTS MI.CE-1006
Laboratory Cement Autoclave With analogue readout for temperature
MILESTONE INSTRUMENTS MI.CE-1006D
Laboratory Cement Autoclave With Electronic Digital Readout for temperature
MILESTONE INSTRUMENTS MI.CE-1013
This apparatus has specially been designed to prepare cement mortar for strength determination as specified in IS: 4031. It can also be used in mixing lime with pozzolonic materials for determinati...
MILESTONE INSTRUMENTS MI.CE-1014
This apparatus has specially been designed to prepare cement mortar for strength determination as specified in IS: 4031. It can also be used in mixing lime with pozzolonic materials for determinati...
MILESTONE INSTRUMENTS MI.CE-1015
This apparatus has specially been designed to prepare cement mortar for strength determination as specified in IS: 4031. It can also be used in mixing lime with pozzolonic materials for determinati...
MILESTONE INSTRUMENTS MI.CE-1018
Pulveriser machines are used to smash materials into tiny shards or granules. Pulveriser machines can crush all types of items, including plastic, glass, aluminium, concrete, coal, rock, resin, tir...
MILESTONE INSTRUMENTS MI.CE-1023
Vicat Apparatus The apparatus includes one each of: Vicat Mould, Glass Base Plate, Initial Needle (in Plastic Case), Final Needle (in Plastic Case)Consistency Plunger (in Plastic Case) Meets:- IS:...
MILESTONE INSTRUMENTS MI.CE-1024
Vicat Apparatus with Dashpot This apparatus includes Dashpot to facilitate the gentle lowering of the moveable rod Meets:- IS: 5513 Apparatus described below have been designed for determining the...
MILESTONE INSTRUMENTS MI.CE-1024001
Vicat Mould Split Type, with Clamping Ring Apparatus described below have been designed for determining the normal consistency, standard consistency and time of setting of cement and lime in accor...
MILESTONE INSTRUMENTS MI.CE-1032
To determine the fineness of cement, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the methods described below, air pe...
MILESTONE INSTRUMENTS MI.CE-1034
Water Retention Apparatus The apparatus is used in specification tests of masonry cement and physical testing of quicklime and hydrated lime. Unlike older models, the newly designed unit incorporat...
MILESTONE INSTRUMENTS MI.CO-1006
These concrete mixers are ideal for use in laboratory for mixing any semi liquid materials. All works on 220 V, 50 Hz, and single phase The following capacities are available Concrete Mixer, Capaci...
MILESTONE INSTRUMENTS MI.CO-1025
A useful tool for workability determination of concrete mixes of very low workability such as those normally used with Concrete, compacted by Vibration. Concrete mix having maximum size of aggregat...
MILESTONE INSTRUMENTS MI.GE-1002
Cone Drop Test Apparatus Method to determine the resistance of geosynthetics to penetration by steel cone dropped from a fixed height, as a simulation of dropping sharp stones on their surface. Gen...
MILESTONE INSTRUMENTS MI.GE-1003
Cross Permeability Test Apparatus Permeability of a geotextile must be substantially greater than that of the protected soil, so that water can pass freely from the soil through the fabric without ...
MILESTONE INSTRUMENTS MI.GE-1004
Permittivity Test These test methods cover procedures for determining the hydraulic conductivity (water permeability) of geotextiles in terms of permittivity under standard testing conditions, in t...
MILESTONE INSTRUMENTS MI.GE-1006
In-Plane Permeability Test Apparatus This test is necessary for drainage application. The permeameters can be of parallel flow or radial flow type. In either case, flow occurs along the plane of th...
MILESTONE INSTRUMENTS MI.GE-1007.1
Wide-Width Tensile Strength (Wide width strip Method) Meets: - ASTM D 4595-86, ISO 10319:2008, IS-13162 Part -5 Two clamping systems 200 mm wide and 50 mm length in the direction of the applied for...
MILESTONE INSTRUMENTS MI.GE-1007.2
Grab Tensile Strength Test (Breaking load and elongation of geotextile) Meets: - ASTM D-4632, This test measures the ability of the geotextile to distribute concentrated loads. Specially devised cl...
MILESTONE INSTRUMENTS MI.GE-1007.3
Trapezoidal Tear Resistance Test Meets: - ASTM D 4533, IS-14293 Geotextiles can be cut or punctured during field installation, which can create a possible condition by which strength is controlled ...
MILESTONE INSTRUMENTS MI.GE-1007D
The Universal Testing Machine is designed to carry out various tests on Geotextiles viz. Narrow & wide Tensile Strength, Trapezoidal Tearing Strength, CBR Push through and Puncture Strength etc. Th...
MILESTONE INSTRUMENTS MI.GE-1007S
Universal Testing System for Geotextile with Microprocessor control The unit is Digital Microprocessor control and speed regulating by servo controlled motor and the speed can be from 5 mm to 500 m...
MILESTONE INSTRUMENTS MI.GE-1009
Hydrodynamic Sieve Test Apparatus: The apparatus consists of two test drums of 14 cm dia and 10 cm effective length with 16 nos. of 4 mm dia rods provided circumferentially at equal spacing to hold...
MILESTONE INSTRUMENTS MI.GE-1013
This chamber is capable of maintaining a temperature range from - 40 to + 100°C and controlled by the PID controller for better accuracy.
MILESTONE INSTRUMENTS MI.GE-1014
The Bursting Strength Tester is designed to find bursting strength of geotextile/fabric/leather/paper/paper board. A test specimen is held between two annular clamps under sufficient pressure to mi...
MILESTONE INSTRUMENTS MI.GE-1017
Digital Twist Tester Yarn Test Length - : 250 MM FIX LENGTH. Suitable For - S/Z TYPE OF TWISTED YARNS. RANGE - UPTO 9999 TPM OR 99.99 TPI. RESOLUTION : 1 TPM OR 0.01 TPI"
MILESTONE INSTRUMENTS MI.GE-1018
Air Permeability tester up to with four different type adaptor 5 cm2, 10 cm2, 20 cm2 & 38 cm2, with Manometer & Rota Meter.
MILESTONE INSTRUMENTS MI.PA-1002
Scratch Hardness Tester For determining the scratch hardness of ready mixed paints and enamels, which is the minimum load required to produce a scratch showing the bare metal surface of the painted...
MILESTONE INSTRUMENTS MI.PA-1005
Flexibility and Adhesion Tester The paint film is bent through 180° over a 6.35 mm dia rod and examined for any damage, detachment or cracking of the film. The tester consists of two plates hinged ...
MILESTONE INSTRUMENTS MI.PP-1003
Marshall Apparatus Most frequently used test by highway departments, contractors, engineers, testing laboratories and governmental agencies is the stability test using Marshall Apparatus. The test ...
MILESTONE INSTRUMENTS MI.PP-1007
Kinematic Viscometer bath It consists of water bath made of M. steel. Having the illuminator at rear side. The temperature is controlled by electric relay. It is supplied with one no. of mercury ty...
MILESTONE INSTRUMENTS MI.PP-1010
Standard Tar Viscometer (cut back asphalt) As per IP 71 and IS 1206 standards. It is used for determination the viscosity of road oils and cut back bitumen. It consists of S.S. bath with cup of 10m...
MILESTONE INSTRUMENTS MI.PP-1011
Say bolt Viscometer It is used to determining the viscosity of fuel oil and lubricating oil (thin and thick). The unit consists of stain less steel bath oil cup that centrally placed in water bath....
MILESTONE INSTRUMENTS MI.PP-1023
Vacuum Pump, 700mm/hg This pump is used for maintaing vaccun in viscometer
MILESTONE INSTRUMENTS MI.RO-1003
Rock Cutting Machine (Lab Type) Also Know as Abrasive cut off machine
MILESTONE INSTRUMENTS MI.RO-1005
Core Drilling Machine (Gasoline Engine Operated) Heavy duty, pillar type frame with Diesel Engine operated with 5 HP capacity Varying cutting feeds provided with water-fed swivel head to connect to...
MILESTONE INSTRUMENTS MI.RO-1006
Rock Bolt Pull Out Test These are used to measure the working and ultimate capacities of rock bolt anchors. Further, our products comprises of a central hole jack, hand pump with load gauge, direct...
MILESTONE INSTRUMENTS MI.RO-1007
Point Load Index Tester: (Hand Operated) Point Load Strength Index of rock cores and irregular lumps, which may be tested without any treatment. The Point Load Test is primarily an Index Test for s...
MILESTONE INSTRUMENTS MI.RO-1008
Point Load Index Tester: (Electrical Operated) Same as MI.RO-1007 but the it has both Hand operated as well electrical operated
MILESTONE INSTRUMENTS MI.RO-1009
Compact table model 20 cm dia Top and Adopter to hold polishing cloth or paste Sample Holders to accommodate upto NX size Cores Continuous water feed arrangement during operation This bench mounte...
MILESTONE INSTRUMENTS MI.RU-1003
Universal Testing Machines This machine is for testing following test on the rubber. This is avilible from 50 kg to 500 kg. The cross head speed is 1 to 500 mm/min. Tensile Compression Flexural Pee...
MILESTONE INSTRUMENTS MI.SO-1002
Compaction Mould, Dia. 4" Made of Gun metal Compaction Mould, Dia. 4" Made of M. Steel Modified Compaction Mould, Dia. 6" Made of Gun metal Modified Compaction Mould, Dia. 6" Made of M. Steel
MILESTONE INSTRUMENTS MI.SO-1004
The standard outfit comprises fixed ring type of consolidometer cell for testing specimens 60 mm dia x 20 mm thick, but the unit is so designed that specimens of varying sizes from 50 mm dia to 100...