MAKINO A100E
The A100E provides a large workzone of 74.8” in diameter by 59.1” in height larger than other Makino horizontal machining centers. It is 20 percent heavier than any other Makino a-Series machine, w...
MAKINO A120NX
MAKINO A40
Introducing the Makino a40, a first-of-its-kind horizontal machining center purpose-designed and built to address the challenges of non-ferrous die cast parts production.
MAKINO A500Z
Makino is excited to announce the newest addition to our family of high capability horizontal machining centers, the five axis a500Z. This versatile machine builds upon the industry leading perform...
MAKINO A51NX
The Makino a51nx is a 400mm horizontal machining center that builds on the highly successful a51 platform with key high performance machining technologies that take productivity, accuracy and machi...
MAKINO A51NX PRO 6
MAKINO A51NX-5XU
Manufacturers of medical, aerospace, prototype and complex multi-face parts have long understood the advantages of 5-axis machining. Five-axis machining capability can improve productivity and qual...
MAKINO A61NX
The a61nx is a 500mm, 40-taper production horizontal machining center. The a51nx and a61nx share key machine technologies that take part productivity, accuracy and machine reliability to the next l...
MAKINO A61NX PRO 6
MAKINO A61NX-5E
The a61nx-5E five-axis horizontal machining center is built specifically for high-efficiency aluminum machining of small to mid-size, complex five-axis components and monolithic aerospace parts. It...
MAKINO A7
The A7 5-axis horizontal machining center is built specifically for high-efficiency machining of large, complex aluminum monolithic aerospace parts. Its design is based on the widely successful MAG...
MAKINO a71
The a71 horizontal high-speed milling machine is rapidly becoming one of the most popular platforms for high-volume machining of parts made of cast iron and light alloys. Spindle integration with t...
MAKINO A71NX
MAKINO A81NX
Large Parts...Large Features The a81nx is Makino’s next generation 630mm horizontal machining center. It builds on the industry leading performance of its predecessor with new design elements foc...
MAKINO a82
a82 for Large Part Machining The a82 HMC brings a new level of performance to large part machining, including diesel engine components or any large part requiring longer travel in the X-axis. Desi...
MAKINO a82M
a82M HMC for Titanium Milling The a82M horizontal machining center is designed for milling tough, hard materials. It is ideally suited for large-diameter boring and face milling on materials such ...
MAKINO A92
a92 HMC for Construction Equipment Manufacturing The a92 brings high-efficiency machining to large part production. Designed for unparalleled stiffness and rigidity, the a92 is the ideal machine p...
MAKINO A99E
Ideally suited for manufacturing in the diesel engine block, transmission and semiconductor markets, the A99E accepts loads up to 4,400 lbs., with an optional upgrade to 6,600 lbs. (3,000 kg). A 40...
MAKINO BX3
The Makino BX3 machine is purpose-built for the EDM Drilling demands of high volume production applications of cooling film hole features that are found in Blade and Vane turbine engine components....
MAKINO D200Z
D200Z design incorporates extreme speeds and precision for tighter tolerances and flawless blends and matches in complex 3-D contoured workpieces. From roughing to high-speed finishing of multifac...
MAKINO D300
The D300 is designed to provide superior sustained dynamic accuracy in a five–axis configuration. Core-cooled ballscrews, temperature-controlled DD motors and spindle all combine to deliver therma...
MAKINO D500
The D500 is designed to provide superior sustained dynamic accuracy. Makino Thermal Stabilizer technology isolates the machine from ever-changing shop conditions. Insulated castings, core-cooled ba...
MAKINO D800Z/40
The D800Z is designed for high-performance job shops providing precision large part 5-axis machining for the die/mold and aerospace markets. Like the D300 and D500 machines, the D800Z offers easy a...
MAKINO D800Z/50
The D800Z is designed for high-performance job shops providing precision large part 5-axis machining for the die/mold and aerospace markets. Like the D300 and D500 machines, the D800Z offers easy a...
MAKINO DA300
The DA300 is inspired by the best design characteristics from both vertical and horizontal machine platforms to deliver the highest productive capabilities for multi – axis workpieces in the very s...
MAKINO EDAC1
The world’s most accurate Ram EDM, Makino’s EDAC1, is capable of producing corner radii of 0.00019 inches (0.005mm) and surface finish quality of 0.000024 inches (0.6 micron) Ry. This machine achie...
MAKINO EDAF2
The EDAF2 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...
MAKINO EDAF2-FH
Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...
MAKINO EDAF3
The EDAF3 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...
MAKINO EDAF3-FH
Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...
MAKINO EDBV3
The newly developed water-based EDBV3 (Electrical Discharge Blades and Vanes) machine has been specifically designed for blade and vane machining in the aerospace and power generation industries. T...
MAKINO EDBV8
The newly developed water-based EDBV8 (Electrical Discharge Blade and Vane) machine has been designed to produce the cooling and shaped diffuser holes for gas turbine engines for the Aerospace and ...
MAKINO EDFH-1
Makino now offers a high-accuracy fine-hole machining configuration on the ultra-precision EDAC-1 sinker EDM platform. The EDFH1 is a re-configured EDAC-1 machine that incorporates a fine-hole mach...
MAKINO EDGE2I
The EDGE2i machine brings an effective combination of high performance and versatility to Sink EDM operations. The EDGEi-Series machines are configured with many productive technologies to efficien...
MAKINO EDGE3I
The advanced technologies and intelligent design of the EDGEi-Series machines deliver an unparalleled value, capability, and reliable productivity to Sinker EDM operations. The EDGE3i machine provi...
MAKINO EDNC10
MAKINO EDNC15
MAKINO EDNC17
The EDNC17 offers the same utility and capability as the smaller EDNC15 machine, but provides larger X/Y strokes and a larger work tank area. Excellent access to the Work Zone is provided with the...
MAKINO EDNC20
MAKINO EDNC21
MAKINO EDNC6
MAKINO EDNC8
MAKINO F3
The new F3 vertical machining center is designed to provide stiffness and rigidity for chatter-free cutting, agility for high speed/hardmilling and accuracies for tight-tolerance blends and matches...
MAKINO F5
The F5 vertical machining center is designed to provide stiffness and rigidity for chatter-free cutting, agility for high speed/hardmilling and accuracies for tight-tolerance blends and matches typ...
MAKINO F5 PRO 6
The F5 Pro 6 vertical machining center is designed to provide stiffness and rigidity for chatter-free cutting, agility expected from a hard milling machine and accuracies for tight-tolerance blends...
MAKINO F5-5XR
The F5-5XR vertical machining center combines the speed, precision and flexibility required for tight-tolerance, 5-axis, hardmilling applications. Based upon the F5, the F5-5XR is an affordable 5-a...
MAKINO F8
The F8 large, vertical machining center is designed to provide the power, speed, precision and versatility to attack both large production part applications as well as big die and mold components. ...
MAKINO F9
The F9 large, vertical machining center is designed to provide the power, speed, precision and versatility to attack both large production part applications as well as big die and mold components. ...
MAKINO FB127
The FB127 vertical machining center provides high-speed machining with superb accuracy, efficient chip removal and ease of operation, for long cycle time die/mold parts. The machine is equipped wit...
MAKINO G5
Today’s capital equipment must be more flexible and capable than ever. With this in mind, Makino has introduced the G5 CNC Grinder 5-axis horizontal machining center, capable of grinding, milling, ...