New Miscellaneous Testers (84)
New Models (84)
1 - 50 of 84 Models
thumb

FIE CTE-100

Electronic Compression Testing Machine

1 photo
Brochure
thumb

FIE CTE-200

Electronic Compression Testing Machine

1 photo
Brochure
thumb

FIE CTE-300

Electronic Compression Testing Machine

1 photo
Brochure
thumb

FIE CTE-50

Electronic Compression Testing Machine

1 photo
Brochure
thumb

FIE CTE-500

Electronic Compression Testing Machine

1 photo
Brochure
thumb

FIE UTES-10

Electronic Universal Testing Machine

1 photo
Brochure
thumb

FIE UTES-100

Electronic Universal Testing Machine

1 photo
Brochure
thumb

FIE UTES-20

Electronic Universal Testing Machine

1 photo
Brochure
thumb

FIE UTES-40

Electronic Universal Testing Machine

1 photo
Brochure
thumb

FIE UTES-60

Electronic Universal Testing Machine

1 photo
Brochure
thumb

FIE UTN-10

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

FIE UTN-100

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

FIE UTN-20

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

FIE UTN-200

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

FIE UTN-300

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

FIE UTN-40

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

FIE UTN-60

Features : • Open type crosshead. • Hydraulic wedge action grips. • Load cell technology. • Long test stroke and test space. • Straining at variable speeds to suit a wide range of material...

1 photo
Brochure
thumb

HYDROPOWER HYDRAULIC TESTRIG

Hydraulic depicted below is a typical test equipment designed and manufactured for testing automobile component. This equipment is PC controlled not only for high speed response of hydraulic system...

1 photo
thumb

KND HYDRAULIC PRESSURE TEST PUMP

GENERAL DESCRIPTION . Hydraulic Pressure Test Pumps conventionally known as Boiler Test Pumps are indispensable to the manufacturers of Boilers, Castings, Centrifugal Pumps, C.I. Mains, Pipelines, ...

1 photo
thumb

MILESTONE INSTRUMENTS MI.CE-1023

Vicat Apparatus The apparatus includes one each of: Vicat Mould, Glass Base Plate, Initial Needle (in Plastic Case), Final Needle (in Plastic Case)Consistency Plunger (in Plastic Case) Meets:- ...

1 photo
thumb

MILESTONE INSTRUMENTS MI.CE-1024

Vicat Apparatus with Dashpot This apparatus includes Dashpot to facilitate the gentle lowering of the moveable rod Meets:- IS: 5513 Apparatus described below have been designed for determining...

1 photo
thumb

MILESTONE INSTRUMENTS MI.CE-1024001

Vicat Mould Split Type, with Clamping Ring Apparatus described below have been designed for determining the normal consistency, standard consistency and time of setting of cement and lime in acc...

1 photo
thumb

MILESTONE INSTRUMENTS MI.CE-1032

To determine the fineness of cement, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the methods described below, air pe...

1 photo
thumb

MILESTONE INSTRUMENTS MI.CE-1034

Water Retention Apparatus The apparatus is used in specification tests of masonry cement and physical testing of quicklime and hydrated lime. Unlike older models, the newly designed unit incorpora...

1 photo
thumb

MILESTONE INSTRUMENTS MI.CO-1025

A useful tool for workability determination of concrete mixes of very low workability such as those normally used with Concrete, compacted by Vibration. Concrete mix having maximum size of aggregat...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1002

Cone Drop Test Apparatus Method to determine the resistance of geosynthetics to penetration by steel cone dropped from a fixed height, as a simulation of dropping sharp stones on their surface. Ge...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1003

Cross Permeability Test Apparatus Permeability of a geotextile must be substantially greater than that of the protected soil, so that water can pass freely from the soil through the fabric without...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1004

Permittivity Test These test methods cover procedures for determining the hydraulic conductivity (water permeability) of geotextiles in terms of permittivity under standard testing conditions, in ...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1006

In-Plane Permeability Test Apparatus This test is necessary for drainage application. The permeameters can be of parallel flow or radial flow type. In either case, flow occurs along the plane of t...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1007.3

Trapezoidal Tear Resistance Test Meets: - ASTM D 4533, IS-14293 Geotextiles can be cut or punctured during field installation, which can create a possible condition by which strength is controlle...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1007D

The Universal Testing Machine is designed to carry out various tests on Geotextiles viz. Narrow & wide Tensile Strength, Trapezoidal Tearing Strength, CBR Push through and Puncture Strength etc. Th...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1007S

Universal Testing System for Geotextile with Microprocessor control The unit is Digital Microprocessor control and speed regulating by servo controlled motor and the speed can be from 5 mm to 500 ...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1009

Hydrodynamic Sieve Test Apparatus: The apparatus consists of two test drums of 14 cm dia and 10 cm effective length with 16 nos. of 4 mm dia rods provided circumferentially at equal spacing to hol...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1014

The Bursting Strength Tester is designed to find bursting strength of geotextile/fabric/leather/paper/paper board. A test specimen is held between two annular clamps under sufficient pressure to mi...

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1017

Digital Twist Tester Yarn Test Length - : 250 MM FIX LENGTH. Suitable For - S/Z TYPE OF TWISTED YARNS. RANGE - UPTO 9999 TPM OR 99.99 TPI. RESOLUTION : 1 TPM OR 0.01 TPI"

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1018

Air Permeability tester up to with four different type adaptor 5 cm2, 10 cm2, 20 cm2 & 38 cm2, with Manometer & Rota Meter.

1 photo
thumb

MILESTONE INSTRUMENTS MI.GE-1019

DIN Abrasion Tester

1 photo
thumb

MILESTONE INSTRUMENTS MI.PA-1002

Scratch Hardness Tester For determining the scratch hardness of ready mixed paints and enamels, which is the minimum load required to produce a scratch showing the bare metal surface of the painte...

1 photo
thumb

MILESTONE INSTRUMENTS MI.PA-1005

Flexibility and Adhesion Tester The paint film is bent through 180° over a 6.35 mm dia rod and examined for any damage, detachment or cracking of the film. The tester consists of two plates hinged...

1 photo
thumb

MILESTONE INSTRUMENTS MI.PL-1002

HDT&VICAT Tester

1 photo
thumb

MILESTONE INSTRUMENTS MI.PP-1003

Marshall Apparatus Most frequently used test by highway departments, contractors, engineers, testing laboratories and governmental agencies is the stability test using Marshall Apparatus. The test...

1 photo
thumb

MILESTONE INSTRUMENTS MI.RO-1006

Rock Bolt Pull Out Test These are used to measure the working and ultimate capacities of rock bolt anchors. Further, our products comprises of a central hole jack, hand pump with load gauge, direc...

1 photo
thumb

MILESTONE INSTRUMENTS MI.RO-1007

Point Load Index Tester: (Hand Operated) Point Load Strength Index of rock cores and irregular lumps, which may be tested without any treatment. The Point Load Test is primarily an Index Test for ...

1 photo
thumb

MILESTONE INSTRUMENTS MI.RO-1008

Point Load Index Tester: (Electrical Operated) Same as MI.RO-1007 but the it has both Hand operated as well electrical operated

1 photo
thumb

MILESTONE INSTRUMENTS MI.RU-1001

Electronic Rubber Stiffness Testing Machine

1 photo
thumb

MILESTONE INSTRUMENTS MI.RU-1003

Universal Testing Machines This machine is for testing following test on the rubber. This is avilible from 50 kg to 500 kg. The cross head speed is 1 to 500 mm/min. Tensile Compression Flexural...

1 photo
thumb

MILESTONE INSTRUMENTS MI.RU-1005

Resilience Tester

1 photo
thumb

MILESTONE INSTRUMENTS MI.RU-1008

Sulfur Dioxide Tester

1 photo
thumb

MILESTONE INSTRUMENTS MI.SO-1002

Compaction Mould, Dia. 4" Made of Gun metal Compaction Mould, Dia. 4" Made of M. Steel Modified Compaction Mould, Dia. 6" Made of Gun metal Modified Compaction Mould, Dia. 6" Made of M. Steel

1 photo