Auction - On-LocationDUFF NORTON * Large Cap, Multi Axis CNC Machinery & Turning, Thread Roller, Saws, Fab & Cranes

AVAILABLE FOR IMMEDIATE SALE:

JOHNFORD LC-50360D CNC Turning & Milling Flatbed Lathe:

JOHNFORD LC-50360D 50” x 354” HD CNC Flatbed Lathe with Y-Axis & Milling, 20” 3-Jaw Chuck & 20″ 3-Jaw Rear Mounted Chuck, 50.19” Swing Over Bed Ways, 35.82” Swing Over Cross Slide, 354” Center Distance, 45” Bed Width, 6.92” Headstock Spindle Bore, Auto Headstock Spindle Speeds to 1,000 RPM, 9.44” Headstock Bearing Diameter, 12 Auto-Indexing Turret Positions, Milling Spindle, 4” Y-Axis Travel, Rotary Spindle Tailstock Quill with 7.87” Quill Diameter, 9.84” Quill Travel, (4) Hydraulic Steady Rests, Enclosure, Coolant, Chip Conveyor, FANUC Oi-TF PLUS CNC Control, mfg.2016 *APPROXIMATELY 2,250 TOTAL HOURS
OKK HM800S 4-Axis High-Speed CNC Horizontal Machining Center:

OKK HM800S 4-Axis High-Speed CNC Horizontal Machining Center with (2) 800mm x 800mm Pallets, .001 Pallet Rotation, #50 Spindle Speeds to 10,000 RPM, Pallet Load Capacity to 2,000 Kg, Approx. 1,400mm X-Axis Travel, 1,100 Y-Axis, 1,000mm Z-Axis, Workpiece Measurement & Offset Function, Parts Probing, 160 Position ATC, Chip Conveyor, FANUC 31iS Model A CNC Control, mfg.2015
IN PLANT, UNDER POWER – CALL (704)821-4315 FOR PRICING & DETAILS

Large Capacity, Multi-Axis OKK CNC Machining & JOHNFORD Turning, Gear, Thread Rolling, & Fabrication Equipment:

Multi-Axis CNC & Other Turning Centers:

JOHNFORD LC-50360D 50” x 354” HD CNC Flatbed Lathe with Y-Axis & Live Milling, 20” 3-Jaw Chuck & 20″ 3-Jaw Rear Mounted Chuck, sn:T6D160009, mfg.2016, LOW HOURS – Approx. 2,250 Operating Hours! *AVAILABLE FOR IMMEDIATE SALE!
HAAS ST-40T CNC Turning Center with 18” 3-Jaw Chuck, sn:67930, mfg.2004
(2) OKUMA LB-15 CNC Turning Centers with 10” & 8” 3-Jaw Chucks, sn:9224 • sn:4257
4-Axis OKK Horizontal Machining Center:

OKK HM800S 4-Axis High Speed CNC Horizontal Machining Center with (2) 800mm x 800mm Pallets, .001 Pallet Rotation, #50 Spindle Speeds to 10,000 RPM, mfg.2015, *AVAILABLE FOR IMMEDIATE SALE!
CNC Gear Hobber, Thread Roller, Grinding, & Threading Machinery:

GLEASON/PHOENIX 125GH 6-Axis CNC Gear Hobber with .25” – 5” Diameter Capacity, FANUC 15M CNC Control, sn:910801
TESKER TR-D000885 Automatic Thread Roller with BARNES Fabric Filtration System, Infeed & Outfeed Conveyor, Push Button Controls
PRATT & WHITNEY 6” x 60” Gear Grinder
GALLMEYER & LIVINGSTON 6” x 18” Surface Grinder
GOULD & EBERHARDT Thread Indexer & Gear Cutting Machine
MANNCIONI FIRENZI Type MD 25” x 75” CNC Thread Chasing Lathe with 21” 3-Jaw Chuck, FAGOR CNC Control with RPG
MANNCIONI FIRENZI 16” x 97” CNC Thread Chasing Lathe with 10” 3-Jaw Chuck, FAGOR CNC Control with RPG
MANNCIONI FIRENZI 15” x 73” CNC Thread Chasing Lathe with 10” 3-Jaw Chuck, FAGOR CNC Control with RPG
MANNCIONI FIRENZI 70” Thread Chasing Lathe with 18” 3-Jaw Chuck
Paint Booths & Heat-Treating Equipment

JBI INC Model IDB-168-S “Dry Booth” Paint Booth System with Backdraft Ventilation, NORDSON Mixers & Accessories, 100’+ ri Powered Conveyor, sn:24154
AJAX TOCCO Magnathermic Heat Treat Machine with INDUCTRON II Microprocessor Control, ABB PanelMate EPROPS PLC Control, Magnescan JC Controls
BLUE M Solid Taper Furnace with Temperature Control, Secondary Manual Paint Booth
General Machining & Turning

BRIDGEPORT Series-II HD Vertical Knee Mill with 11” x 65” Table, Power Feed, MITUTOYO DRO
BRIDGEPORT Series I Vertical Knee Mill with 9” x 42” Table, Power Knee, MITUTOYO DRO
ALLIANT 1054-V3 Vertical Knee Mill with 10” x 54” Power Table, Variable Speeds, MITUTOYO DRO
AMERICAN Hole Wizard 6’ Radial Arm Drill with T-Slotted Table
OKK MH-5F3, MH2V, and MH-2P Vertical & Horizontal Milling Machines
SUMMIT 40” x 20’ Engine Lathe with 15” 3-Jaw Chuck, 5.5” Bore
AMERICAN 20” x 84” Engine Lathe with 12” 3-Jaw Chuck, 1.75” Bore
CLAUSING COLCHESTER 15” Lathe with 8” 3-Jaw Chuck, In/M Threading, ANILAM DRO
SHELDON Model 15 15” x 55” Chucking Lathe with 10” 3-Jaw Chuck, MITUTOYO DRO
LARGE ASSORTMENT OF WARNER SWASEY, JONES & LAMSON Universal Turret Lathes Including Models No. 5, No. 5-4 1/2, No. 4-A No. 3, No. 3-A, No. 5-3,
Fabrication & Welding

COSEN C-300NC Horizontal Bandsaw with 14” x 12” Capacity, Programmable Controls, sn:09513474, mfg.2006
DOALL Job Selector Vertical Band Saw with Blade Weld/Grind Attachment
SCOTCHMAN LM/350/LT Coldsaw, sn:SD10210207
L-COMPANY 150-Ton H-Frame Press with 36” x 48” Table
JEFFRIES & Other Multi-Presses, RAM PAC H-Frame Press
PECK/MILLER 26” x 169” Welding Lathe & Positioner with 8” 3-Jaw Chuck, MILLER Deltaweld 652 Welder, MILLER 70 Series Wire Feeder, Tailstock
COMPLETE WELDING DEPARTMENT INCLUDING MILLER Dimension 650, Syncrowave 250DX, LINCOLN IdealArc DC600 Welders, Smog Hogs, Welding Positioners, Wired Feeders, Dry Rod Ovens, Initial Pinch Pedestal Grinders, Welding Tables & Accessories, etc.
Material Handling, Rolling Stock, Quality Control, & Plant Support Equipment:

HUGE ASSORTMENT OF ACE, UNIFIED INDUSTRIES, & Other Freestanding Overhead Bridge Crane Systems with COFFING, CM LOADSTAR, & Other Hoists from ½-Ton to 2-Ton Capacity
30+ CONTRAX, CM LOADSTAR, COFFING, & Other Freestanding & Jib Cranes from ¼-Ton to 1-Ton Capacity
ASSORTED HYSTER, YALE, CAT, & CLARK LP, Electric, & Narrow Isle Forklifts from 2,700 to 5,000 lb. Capacity
CROWN & FACTORY CAT Floor Sweepers, HYSTER Electric Pallet Jacks, GENIE Scissor Lifts, & CUSHMAN Shop Carts
QUALITY CONTROL EQUIPMENT INCLUDING JONES & LAMSON Optical Comparator with HEIDENHEIN QuadraCheck DRO, MITUTOYO & TRIMOS Digital & Other Height Gauges, Granite Surface Plates, Micrometers, Pin & Gauge Block Sets, Hardness Testers,
LARGE ASSORTMENT OF PLANT SUPPORT EQUIPMENT Including KURT & Other Vises, Pallet Racking & Cantilever Racks, Pallet Jacks, Work Benches, Toolboxes, LISTA & Vidmar Style Cabinets, Hardware Cabinets, Scrap Material, Collets, Lathe Tooling, Tool Holders, Carbide & Perishable Tooling, Tool Holder Carts, HD Cabinets, Dump Hoppers, 4th-Axis Rotary Tables, Bench Centers, PWB SWISS Toolsetter 10, CLAUSING, ROCKWELL, DELTA & Other Gang & Pedestal Drill Presses, Benchtop & Pedestal Grinders, Electric & Hand Tools, & MUCH MORE!
Auction Details:

After the auction is over, you will receive an email in the body of the email it will have wire instruction, rigger and onsite supervisor information. Attached to that email will be your invoice. Please sign and send back to our office via email or fax.
18% Buyers Premium for All Purchases
You must register with Bidspotter and be approved to place bids in the auction.
Must Register 24 hours prior to the Start of the Auction
Tax: You will be charged local tax rate unless you have provided us with your tax exempt number. Tax Exempt Form
If you are outside the USA or Canada you are required to make a refundable deposit of $5000 USD. If you are interested, please register with www.bidspotter and then please contact Asset Sales for Wire Instructions.
Payment Information:

PAYMENT DUE BY: Wednesday, December 4th, 2024
Asset Sales, Inc. only Accepts U.S. Currency.
Accepted payment methods:
Wire Transfer
If paying via Company Check you must have a Bank Letter of Guarantee to bid. Example of letter: All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable to Asset Sales, Inc. Your bank letter should be similar to the following: “Mr. (Customer Name) is a customer of this bank. This bank will guarantee unqualified payment to Asset Sales, Inc. on the account listed herein up to the amount of $_______. This letter is valid until (date).”
Certified Checks drawn on U.S. Banks Only
WE DO NOT ACCEPT CREDIT CARDS / DEBIT CARDS
Removal of Purchases:

Removal – Beginning the Day After Auction at 8:00 A.M. – 4:00 P.M. Weekdays.
Last Day for Removal: Thursday, December 12th, 2024
Rigging and Removal is the Responsibility of the Buyer – Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third-Party Logistics Firm to Manage the Removal Process for Them.
Certificate of Insurance:

Holder: Columbus McKinnon DBA Duff-Norton – 9415 Pioneer Avenue – Charlotte, NC 28273
Additional Insured: Asset Sales, Inc. – 163 Associates Lane – Indian Trail, NC 28079
General Liability: $1,000,000 Each Occurrence
General Aggregate: $2,000,000
Available Riggers:

Industrial Services & Sales – Terry Wilson – (O): (251)517-4002 | (C): (704)214-2732 | twilson@industrialservicesandsales.com
CNC MILLWRIGHT: Machine Tool Science LLC – Andrew Forbes – (C): (803)493-8200 | andrew.forbes@machinetoolscience.com
Site Supervisor:

TBA
Auction License Number: North Carolina: Lance Mannion 6003, Cory Mannion 10628 and Asset Sales, Inc. 6625