Minimum Bid - No Reserve AuctionPastAuction - Online

ID #
11392
Description
WMW Niles Model DPS/1 1400 x 7000/1 55" x 275" (1400 x 7000 MM) Manual Gap Bed Lathe, Supermill MDR125 5.12" Table Type Horizontal Boring Mill, Juaristi 150-MP 5.9" CNC Floor Type Horizontal Boring Mill, Futurmill Planer Mill
Type
Online
Starts At
8/5/19 8:00 AM EDT
Ends At
9/5/19 2:00 PM EDT
Inspection
By appointment
Location
Multiple Locations
United States
Contact
Please contact Dan McDonald with any questions at 631‑249‑5566
Prestige Equipment Corp.

This Auction Is No Longer Active

Receive Auctions By Email

You now can receive a daily email with all promoted auction events. Simply visit your email settings to set up your update.

ID #
11392
Description
WMW Niles Model DPS/1 1400 x 7000/1 55" x 275" (1400 x 7000 MM) Manual Gap Bed Lathe, Supermill MDR125 5.12" Table Type Horizontal Boring Mill, Juaristi 150-MP 5.9" CNC Floor Type Horizontal Boring Mill, Futurmill Planer Mill
Type
Online
Starts At
8/5/19 8:00 AM EDT
Ends At
9/5/19 2:00 PM EDT
Inspection
By appointment
Location
Multiple Locations
United States
Contact
Please contact Dan McDonald with any questions at 631‑249‑5566

Summary of Items

Featured Assets -

WMW Niles Model DPS/1-1400×7000/1 55″ x 275″ (1400 x 7000 MM Capacity Manual Lathe, 43.3″ (1100 MM) Over Carriage, Speeds (18) 3.55-180 RPM, 49.2″ (1100 MM) Face Plate w/ 4-Chuck Jaws, (2) 27″ (685 MM) Steady Rests, Inch & Metric Threading, 55″ (1400 MM) Wide 3-Way Bed, 45 HP (35 Kw) Main Motor, S/N 35-0387
Supermill Model MDR-125 5.12″ Table Type Boring Mill, 5.12″ (125 MM) Spindle Diameter, Travels; X-78.74″ (2000 MM), Y-64″ (1625 mm), Z Spindle 33″ (840 MM), W-50″ (1270 MM), 55″ x 60″ 1400 x 1525 MM Rotary Table, Speeds 7-1000 RPM, #50 taper, Power Draw Bar, Pendant, 4-Axis Millvision Digial Readouts, 20 HP (Note: Tailstock in Photo Not Included) S/N 4-125A-1
Juaristi Model 150-MP 5.9″ CNC Floor Type Horizontal Boring Mill, 5.9″ (150 MM) Spindle Diameter, Travels; X-236″ (6000 MM), Y-118.11″ (3000 MM), Z-Spindle 39″ (1000 MM), W-Column Infeed 29.52″ (750 MM), Speeds 5-1600 RPM, Juaristi Universal Angle Head, Chip Conveyor, Hardened Ways, 67 HP (50 Kw) Spindle Motor, NOTE: X-Axis Rack & Pinion Needs Repair
Futurmill Double Housing Planer Mill, 48″ x 218″ Table (1220 x 5537 MM) Table, 52″ (1320 MM) Distance Between Columns, 196″ (4980 MM X-Axis Table Travel, 30 HP (22 Kw) Futurmill Vertical Milling Head, 30 HP (22 Kw) Futurmill Side Milling Head, Speeds (18) 53-900 RPM, #50 Taper Milling Heads, Way Covers, Pendant Control
Stanko Vertical Boring Mill, 157″ (4000 MM) Table Diameter, 165″ (4200 MM) Turning Diameter, 88.42″ (2245 MM) Distance Under Cross Rail, 63″ (1600 MM) Vertical Ram Travel, Speeds: .37-34 RPM, 100 Ton Table Weight Capacity, Tracer, Taper Turning, Pendant Controls, S/N 217
Karstens Type 53 14″ x 55″ (360 x 1400 MM) CNC Angle Head Grinder, 0-30 Degree Angle Head Swivel, 30″ (750 MM) Wheel Diameter, 1-1000 RPM Work Speeds, 20 HP (27 Kw) Grinding Wheel Motor, (4) Spare Wheel Hubs, Coolant & Filtration System, BWO 900 CNC Control, S/N 960340653142
Lodge & Shipley Profiturn 40 CNC Lathe, 12.5″ (317 MM) Sindle Bore, 33″ (838 MM) Over Bed, 160″ (4064 MM) Distance Between Centers, Speeds 6-650 RPM, 32″ (812 MM) Front & Rear 4-Jaw Chucks with 12.5″ (317 MM) Holes, 6-650 RPM, 49 HP (37 Kw) Spindle Motor, 4-Position Turret, 6-Position Turret with Cervic Coupling, Steady Rest, Power Tailstock, Chip Conveyor, Pneumatic Roller Stand, GE Fanuc 18iT CNC Control, S/N 50937
Safop 40R CNC Roll Grinder with Turning, 38″ (956 MM Over Bed, 420″ (10,670 MM) Maximum Roll Length, 325″ (8255 MM) Carriage Travel, 518″ (13,160 MM) Bed Length, 61″ (1550 MM) Bed Width, 20 Ton Weight Capacity, 38 HP (29 Kw) Belt Grinding Head, 42 HP (32 Kw) Main Drive Motor, Belt Grinding Head, 4-Way Turning Tool Post, (2) Steady Rests, Heidenhain Scales, Siemens 810T CNC Control, S/N 3170

About the Auctioneer

Address
35 Pinelawn Rd. Ste 203 W.
Melville, New York 11747
United States